Blue S33K3R's GK5
 

Hi all, greetings!

I have been lurking around for a while contemplating if I should start a thread to document my build so what better time than now :)

The ride is a humble 2017 pre-facelift blue GK5 (my 4th Honda)

So here goes!
https://cimg4.ibsrv.net/gimg/www.fit...2686153019.jpg
https://cimg9.ibsrv.net/gimg/www.fit...91d9503da8.jpg
https://cimg5.ibsrv.net/gimg/www.fit...c74be9c56c.jpg

First project

Seeker CF front and rear lip

https://cimg4.ibsrv.net/gimg/www.fit...150156862.jpeg
https://cimg2.ibsrv.net/gimg/www.fit...7d2eb2836.jpeg

After installation, we went for a drive

https://cimg7.ibsrv.net/gimg/www.fit...82257f831a.jpg
https://cimg3.ibsrv.net/gimg/www.fit...510bfdccdc.jpg
https://cimg4.ibsrv.net/gimg/www.fit...f86c41c24a.jpg

sick! Looking forward to seeing it installed. Where you from? And welcome!

Thanks buddy, I am from Singapore

Welcome!!! Very nice!!! Keep posting.🤙

Thanks buddy, but the posts take quite a while to appear?

Loving those Seeker parts! Rad build!

Up next

Work wheels
BC coil overs
Sumole air duct

https://cimg8.ibsrv.net/gimg/www.fit...43597c9e6.jpeg
https://cimg7.ibsrv.net/gimg/www.fit...b407de9d9.jpeg
https://cimg2.ibsrv.net/gimg/www.fit...255851f58.jpeg

Tinted fog lights, DRLs and replaced a black Honda front logo

https://cimg8.ibsrv.net/gimg/www.fit...c5b8746bf.jpeg

Received Cusco front and rear struts

https://cimg3.ibsrv.net/gimg/www.fit...a9ee06f4f.jpeg
https://cimg4.ibsrv.net/gimg/www.fit...295e2af21.jpeg
https://cimg2.ibsrv.net/gimg/www.fit...5a5f8117a.jpeg
https://cimg5.ibsrv.net/gimg/www.fit...3641ef80f.jpeg
https://cimg6.ibsrv.net/gimg/www.fit...27be027c9.jpeg

Looking good man.

Damn I may need to buy one of those Cusco front strut bars for mine. I'll pass on the rear because I use the rear cargo area all of the time and it just gets in the way. For me that is. But they sure look great.

The rear actually comes with quick release but I hardly use the rear area for cargo so it’s kinda permanently there 😁

Upgrading the front brakes to AP Racing CP9440


https://cimg1.ibsrv.net/gimg/www.fit...29b85c10d.jpeg
https://cimg9.ibsrv.net/gimg/www.fit...550214e01.jpeg​​​​​​
https://cimg3.ibsrv.net/gimg/www.fit...1b2264b0a.jpeg
https://cimg6.ibsrv.net/gimg/www.fit...73605a0a2.jpeg
https://cimg7.ibsrv.net/gimg/www.fit...14bcdd13b.jpeg
https://cimg9.ibsrv.net/gimg/www.fit...00014a5b6.jpeg
https://cimg0.ibsrv.net/gimg/www.fit...e84f8b258.jpeg
https://cimg3.ibsrv.net/gimg/www.fit...58a2e34a9.jpeg
https://cimg4.ibsrv.net/gimg/www.fit...0e086fbd5.jpeg

https://cimg9.ibsrv.net/gimg/www.fit...865d54076.jpeg
https://cimg0.ibsrv.net/gimg/www.fit...c267f9155.jpeg
https://cimg2.ibsrv.net/gimg/www.fit...87a15e4cb.jpeg
https://cimg4.ibsrv.net/gimg/www.fit...c73f0dcd6.jpeg

Room bar is next to arrive

https://cimg1.ibsrv.net/gimg/www.fit...cef1005d2.jpeg
https://cimg2.ibsrv.net/gimg/www.fit...9cc5f50de6.jpg

And the RV6

https://cimg1.ibsrv.net/gimg/www.fit...3066a56ec3.png

Did you paint your emblem and garnish? looks nice in gloss black. Usually see people plastidip theirs and im not a fan of the matte finish

I actually bought the emblem black and stick them on the stock ones.

The garnish was black gloss sticker done by a vinyl workshop.


https://cimg2.ibsrv.net/gimg/www.fit...b96a9edce.jpeg

LINK to front brace bar
 

can you send a link to me for the front brace bar??? please


send to contactphil@earthlink.net

link to front upper strut bar please