Olga: The SoCal GK5
#1
09-06-2017, 12:35 AM
Olga: The SoCal GK5
Hello FitFreak.net members, my name is Kevin, and these are the chronicles of my '17 Honda Fit EX 6MT.
--------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------
Engine/Transmission
Hyakushiki Jidousha axle-back exhaust
Acuity Instruments shifter cable bushings
FEEL'S Honda TwinCam Works radiator cap (Type D)
AEM air intake (P/N: 21-748C)
Spoon Sports magnetic engine oil drain plug
Hasport rear motor mount (U70A)
Spoon Sports magnetic transmission drain plug
Torco MTF
Spoon Sports stainless steel clutch line (P/N: 46961-GE8-000)
Brakes
Spoon Sports brake/clutch reservoir sock
Hawk HP Plus brake pads (P/N: HB418N.646)
EBC "USR" series slotted rotors (P/N: USR850)
Techna-Fit stainless steel brake lines (P/N: HN-2615)
Endless RF-650 brake fluid
Suspension/Wheels
Progress Technology 19mm rear anti-sway bar
Feal 441 coilovers
SPC camber bolts (P/N: 81260)
205/50/16 Firestone Firehawk Indy 500
Interior
ASIMO plush doll
Acuity Instruments Accelerator Pedal Relocation Bracket
Spoon Blue Wide Rear View Mirror (P/N: 76400-BRM-004)
Spoon Sports aluminum shift knob
3M Crystalline window film
Acuity Instruments shift boot collar upgrade
Exterior/Aero
Super Bright LEDs license plate bulbs (P/N: 194-WHP6 | Temperature: 6000 K)
Super Bright LEDs reverse light bulbs (P/N: 7440-CW3W-G | Temperature: 6000 K)
PERRIN 2" antenna mast (P/N: PSP-BDY-126)
Luxe Auto Concepts "JDM Yellow" LightWrap vinyl applied to fog light lenses
Morimoto Mini D2S 4.0 projectors
Honda "The Power of Dreams" license plate frames
Höen H8 35W Endurance fog light bulbs
Spoon Sports windshield banner
Super Bright LEDs brake light strobe module (P/N: LSC-100A)
Pending installation
...
Future modifications
...
Olga's current look
--------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------
Engine/Transmission
Hyakushiki Jidousha axle-back exhaust
Acuity Instruments shifter cable bushings
FEEL'S Honda TwinCam Works radiator cap (Type D)
AEM air intake (P/N: 21-748C)
Spoon Sports magnetic engine oil drain plug
Hasport rear motor mount (U70A)
Spoon Sports magnetic transmission drain plug
Torco MTF
Spoon Sports stainless steel clutch line (P/N: 46961-GE8-000)
Brakes
Spoon Sports brake/clutch reservoir sock
Hawk HP Plus brake pads (P/N: HB418N.646)
EBC "USR" series slotted rotors (P/N: USR850)
Techna-Fit stainless steel brake lines (P/N: HN-2615)
Endless RF-650 brake fluid
Suspension/Wheels
Progress Technology 19mm rear anti-sway bar
Feal 441 coilovers
SPC camber bolts (P/N: 81260)
205/50/16 Firestone Firehawk Indy 500
Interior
ASIMO plush doll
Acuity Instruments Accelerator Pedal Relocation Bracket
Spoon Blue Wide Rear View Mirror (P/N: 76400-BRM-004)
Spoon Sports aluminum shift knob
3M Crystalline window film
Acuity Instruments shift boot collar upgrade
Exterior/Aero
Super Bright LEDs license plate bulbs (P/N: 194-WHP6 | Temperature: 6000 K)
Super Bright LEDs reverse light bulbs (P/N: 7440-CW3W-G | Temperature: 6000 K)
PERRIN 2" antenna mast (P/N: PSP-BDY-126)
Luxe Auto Concepts "JDM Yellow" LightWrap vinyl applied to fog light lenses
Morimoto Mini D2S 4.0 projectors
Honda "The Power of Dreams" license plate frames
Höen H8 35W Endurance fog light bulbs
Spoon Sports windshield banner
Super Bright LEDs brake light strobe module (P/N: LSC-100A)
Pending installation
...
Future modifications
...
Olga's current look
Last edited by USDM; 04-18-2019 at 03:47 AM.
#9
09-07-2017, 12:54 PM
Thank you very much! Modern Steel Metallic has definitely grown on me.
Thanks!
Thanks!
Thanks!
Thanks!
#10
09-14-2017, 11:11 PM
Here's a small update for you all! I went ahead and ordered LED license plate and reverse light bulbs. I'm very happy with the results!
The part numbers, for those who may be interested, are listed below this text.
Super Bright LEDs license plate bulbs (P/N: 194-WHP6 | Temperature: 6000 K)
Super Bright LEDs reverse light bulbs (P/N: 7440-CW3W-G | Temperature: 6000 K)
I am happy to report zero fitment issues! Both the license plate and reverse light bulbs are plug and play.
Here's what the laser beams look like when activated:
There's a significant improvement in night-time visibility when using my rear camera.
The part numbers, for those who may be interested, are listed below this text.
Super Bright LEDs license plate bulbs (P/N: 194-WHP6 | Temperature: 6000 K)
Super Bright LEDs reverse light bulbs (P/N: 7440-CW3W-G | Temperature: 6000 K)
I am happy to report zero fitment issues! Both the license plate and reverse light bulbs are plug and play.
Here's what the laser beams look like when activated:
There's a significant improvement in night-time visibility when using my rear camera.
Last edited by USDM; 09-15-2017 at 03:42 AM.
#11
09-16-2017, 03:04 PM
I received my HKS Super Hybrid Filter yesterday!
P/N: 70017-AH016
Below this text is a link containing information on the HKS Super Hybrid Filter.
https://www.hks-power.co.jp/en/produ...ter/index.html
Contents of the box:
Minty!
The sticker made for a nice finishing touch. Overall, I noticed a slight improvement in throttle response as well as a slight increase in induction sound.
P/N: 70017-AH016
Below this text is a link containing information on the HKS Super Hybrid Filter.
https://www.hks-power.co.jp/en/produ...ter/index.html
Contents of the box:
Minty!
The sticker made for a nice finishing touch. Overall, I noticed a slight improvement in throttle response as well as a slight increase in induction sound.
Last edited by USDM; 09-16-2017 at 05:57 PM.
#13
09-17-2017, 03:20 AM
HKS super hybrid panel air filter - Civinfo
How to clean HKS Super Hybrid Air Filter? ? club.liberty.asn.au
I'll probably end up purchasing a new filter when the time comes.
Last edited by USDM; 09-17-2017 at 03:31 AM.
#14
09-20-2017, 12:50 AM
Installed my Acuity Instruments shifter cable bushings today!
Installation was fairly straightforward. I did not have the right tools for the job, but I made it work. This would've been a lot easier with an extra pair of hands. Shifting feels more crisp now!
I also purchased a FEEL'S Honda TwinCam Works radiator cap.
This is a special piece for me because FEEL'S Honda TwinCam Works have built my favorite GK5.
Check out the link below for more information on the FEEL'S GK5!
https://stickydiljoe.com/2016/02/25/...am-visit-2016/
Installation was fairly straightforward. I did not have the right tools for the job, but I made it work. This would've been a lot easier with an extra pair of hands. Shifting feels more crisp now!
I also purchased a FEEL'S Honda TwinCam Works radiator cap.
This is a special piece for me because FEEL'S Honda TwinCam Works have built my favorite GK5.
Check out the link below for more information on the FEEL'S GK5!
https://stickydiljoe.com/2016/02/25/...am-visit-2016/
Last edited by USDM; 10-01-2017 at 04:46 PM.
#15
09-20-2017, 03:20 PM
Nice install. I'll have to give this a try. Have you tried a weighted shift knob? For me, it reduced, just about eliminated vibration and made shifting so much smoother. I wonder how both affect overall feel. (no gay innuendo).
#17
10-03-2017, 08:30 PM
![[LegenD]'s Avatar](https://www.fitfreak.net/forums/customavatars/avatar86137_1.gif){kind=avatar}
Very nice build! Solid mods, and very nice future mod list. 
Great info too - especially love the Acuity shifter cable bushings, didn't even know about these, so thanks a lot for sharing! Spent too much on my Fit recently, but definitely adding this to a Christmas wish list 
Oh and that FEEL's Fit is crazy! Saw a couple of photos a little while back, but had no idea what was under that hood. So awesome!
Great info too - especially love the Acuity shifter cable bushings, didn't even know about these, so thanks a lot for sharing! Spent too much on my Fit recently, but definitely adding this to a Christmas wish list Oh and that FEEL's Fit is crazy! Saw a couple of photos a little while back, but had no idea what was under that hood. So awesome!
#18
10-04-2017, 12:52 AM
Very nice build! Solid mods, and very nice future mod list. Great info too - especially love the Acuity shifter cable bushings, didn't even know about these, so thanks a lot for sharing! Spent too much on my Fit recently, but definitely adding this to a Christmas wish list
Oh and that FEEL's Fit is crazy! Saw a couple of photos a little while back, but had no idea what was under that hood. So awesome!
Great info too - especially love the Acuity shifter cable bushings, didn't even know about these, so thanks a lot for sharing! Spent too much on my Fit recently, but definitely adding this to a Christmas wish list Oh and that FEEL's Fit is crazy! Saw a couple of photos a little while back, but had no idea what was under that hood. So awesome!
#19
10-05-2017, 02:16 AM
Here's another update for you all. Thanks for the idea, sixlovelylies!
P/N: PSP-BDY-126
https://www.rallysportdirect.com/par...ty-antenna-2in
The PERRIN antenna mast is 2" tall and the OEM antenna mast is 7" tall.
P/N: PSP-BDY-126
https://www.rallysportdirect.com/par...ty-antenna-2in
The PERRIN antenna mast is 2" tall and the OEM antenna mast is 7" tall.
Last edited by USDM; 03-16-2018 at 03:03 AM.
#20
10-06-2017, 01:34 AM
Installed my Acuity Instruments Accelerator Pedal Relocation Bracket today!
Check out my review for more information!
https://www.fitfreak.net/forums/3rd-...n-bracket.html
Check out my review for more information!
https://www.fitfreak.net/forums/3rd-...n-bracket.html
Last edited by USDM; 10-06-2017 at 01:41 AM.