Fit DIY: Repair & Maintenance Threads discussing repairs and maintenance you can do yourself

Car Wash Q?

Old Apr 8, 2009 | 07:29 PM
  #1  
jaspap's Avatar
Thread Starter
|
New Member
Joined: May 2007
Posts: 8
From: St.Albert
Question Car Wash Q?

So, will I get swirl marks, even if I just go to a car wash, and only use the pressure washer? If yes, then I won't go, how does everyone feel about Mother's car care products? Thanks for the help.
 
Old Apr 9, 2009 | 02:54 AM
  #2  
qbmurderer13's Avatar
Touched by his noodly appendage
iTrader: (6)
Joined: Oct 2008
Posts: 2,373
From: Orlando, FL
Mothers isnt that great. If your not willing to order online stick with meguiars. You wont get swirl marks by using only the pressure washer. Just dont use it too close to the paint.
 
Old Apr 9, 2009 | 01:54 PM
  #3  
jaspap's Avatar
Thread Starter
|
New Member
Joined: May 2007
Posts: 8
From: St.Albert
Really, it's odd, cause my sister just got a brand new VW bug, and she took it to one of those automated touchless car washes, and she's got swirl marks all over? But your saying, doing it with the wand will be ok?
 
Old Apr 9, 2009 | 02:33 PM
  #4  
Super Mario's Avatar
Member
5 Year Member
iTrader: (2)
Joined: Sep 2006
Posts: 1,625
From: San Diego, CA
You'll be alright using the wand. Just make sure that the paint is 100% clean before you decide to hand dry it. Needless to say you'll scratch your paint if there's any dirt left on there.

+1 on Meguiar's Products.
 
Old Apr 9, 2009 | 03:14 PM
  #5  
qbmurderer13's Avatar
Touched by his noodly appendage
iTrader: (6)
Joined: Oct 2008
Posts: 2,373
From: Orlando, FL
90% of new cars have swirls on them due to the dealer washing them and not having a clue what they're doing.

If your not using 2 buckets with grit guards, a soft wash mitt, and microfiber/waffle qweave towels you will get swirls.
 
Old Apr 9, 2009 | 06:04 PM
  #6  
jaspap's Avatar
Thread Starter
|
New Member
Joined: May 2007
Posts: 8
From: St.Albert
I'm guessing it's expensive to get the swirls out?
 
Old Apr 9, 2009 | 06:11 PM
  #7  
qbmurderer13's Avatar
Touched by his noodly appendage
iTrader: (6)
Joined: Oct 2008
Posts: 2,373
From: Orlando, FL
Not really unless you want to do it yourself. The machine or porter cable which I use costs about 150, and most polishes cost around 40 bucks. Then again you need to buy clay and a bunch of other stuff. I usually charge around $130 for a full detail like the ones in my sig. Takes about 6 hours.
 
Old Apr 14, 2009 | 08:07 PM
  #8  
VTECJunkie's Avatar
Member
Joined: Apr 2009
Posts: 53
From: California
I would invest in a pair of buckets, some quality soap, a proper microfiber / sheepskin wash mitt, and a host of microfiber drying and buffing towels.

A pressure washer will make life easier to get the crap off your car, but to properly get it clean the dirt has to be agitated. That means you need to properly wash the car with your hand (no automated crap).

2 Buckets helps when rinsing your mitt so you don't put all the crap into the soapy water bucket (this reduces chances of scrubbing dirt all over the paint and putting swirls in).

If the car is really rough, i would invest in a nice medium abrasive claybar as well.

Hope this helps.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2015FIT
3rd Generation (2015+)
14
Jan 27, 2015 08:46 PM
gonang
Fit DIY: Repair & Maintenance
72
Mar 9, 2010 08:46 PM
hogwylde
2nd Generation (GE 08-13)
40
Dec 31, 2009 08:14 AM
bryanback
Fit DIY: Repair & Maintenance
17
Jun 9, 2008 08:08 AM
kancerr
Fit DIY: Repair & Maintenance
0
Sep 21, 2007 10:24 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:22 PM.