|
Pinion bar/Rack bar play
Hello guys!
Im new in this forum and i see a lot of helpful topics here that guided me in repairing my fit. I have a problem now that i cant find an answer anywhere. it is about the pinion bar/rack bar play which causes a worrisome noise when going into small bumps. my question now is, can i put a bushing (rubber or metal) that could make it a snug fit between the rod and the tube? or i simply have to replace the whole steering rack? this is the image, the pinion rod and the tube if you can see has a gap. the image is posted sideways TIA PicPaste - IMG_2337-evcLWS2L.jpeg PicPaste - IMG_8604-m5iLcWxB.jpeg |
Put a tie wrap
Originally Posted by flipbizkit
(Post 1256461)
Hello guys!
Im new in this forum and i see a lot of helpful topics here that guided me in repairing my fit. I have a problem now that i cant find an answer anywhere. it is about the pinion bar/rack bar play which causes a worrisome noise when going into small bumps. my question now is, can i put a bushing (rubber or metal) that could make it a snug fit between the rod and the tube? or i simply have to replace the whole steering rack? this is the image, the pinion rod and the tube if you can see has a gap. the image is posted sideways TIA PicPaste - IMG_2337-evcLWS2L.jpeg PicPaste - IMG_8604-m5iLcWxB.jpeg |
Hi i have the same problem.
Do you have any pictures of what you did? Best regards |
did you fix this issue? If so, what was it?
|
Originally Posted by eagle8305
(Post 1390758)
Insert a tie wrap in the space. That's what I did in mine and it's still working from 2 years ago
Still having the problem and can't get rid of it. Please advice |
| All times are GMT -4. The time now is 09:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands