Simota Short Ram Intake
 

Has anybody installed a SIMOTA SHORT RAM INTAKE,If you do could you please show us a picture,also please tell us your impressions and experience in installing it.

I have installed a Simota Charger into my FIT and here are some pics on how I
installed it.

Stock intake:
http://i225.photobucket.com/albums/d...d_2003/003.jpg

now removed from engine bay:
http://i225.photobucket.com/albums/d...d_2003/004.jpg

now I removed this from the intake from the stock and put it into the new intake:
http://i225.photobucket.com/albums/d...d_2003/005.jpg

heres what it should look like now:
http://i225.photobucket.com/albums/d...d_2003/006.jpg
http://i225.photobucket.com/albums/d...d_2003/007.jpg

now install the new bracket to hold the new intake:
http://i225.photobucket.com/albums/d...d_2003/008.jpg

now install the air filter and DONE!! The end result
http://i225.photobucket.com/albums/d...d_2003/009.jpg

hope this helps

How much did you pay for this intake?

I paid around 60 dollars Canadian. I had a bidding war on ebay and won. So it was quite a great deal. It sounds really nice when driving.

I also like the fact that not many people own this type of intake. But I'm always happy to share what I own.

how's the improvement... and you have a video of it

I don't have any numbers of gained hp but I do notice a quicker response on acceleration. I will try to have a video of what it sounds like. But if you don't mind a deep tone on acceleration you'll love this intake.

actually i prefer the deep tone on acceleration... that good to hear man thanx

Just letting everyone know, we see all simota products on our website. So no bidding on ebay hehe

We sell two different styles.

Simota USA - Simota Air filers, Simota Air intakes,Carbon fiber oil catch cans, oil filler caps

bro, mind if I ask anyone knows wat's the opening size of the air breather filter to install? coz I bought this Simota open pod from other ppl and the previous owner wanne keep the filter for himself.

does the simota charger carbon intake suited for 1.5 A/T?

what's the difference in terms of intake tube.. of a m/t from a/t?

I see that the system is just a filter/CF pipe/angle? Also added the crankcase filter. Are there any other pipes/sensors that need readjusting? I have been thinking of making my own CF box, since I have a 3" K&N cone already. Just haven't explored taking out the entire stock system yet.

edit: ah, I see the MAF(?) connection on the angle tube now. Is that it?

there is no MAF, just an IAT sensor which you only need a small rubber gromet to mount into a tube..

nothing

10char

Do you know if the angle tube itself is sold separately? Looks easy to make, but...meh.