Fit's Red H-Emblem
 

Hi everyone,

I've just bought a set (F+R) of genuine red H emblem for my Fit, but they don't fit! :mad:

The parts they sent me are:

Product #: 75700-S5T-E11 which is about 10cm X 12cm
Product #: 75701-S5T-E01 which is about 5cm X 6.5cm

Does any of you guys know if these are the right part numbers? If not, do you know what's the correct part number?

THANK YOU VERY VERY MUCH

search is ur friend its been discussed numerous amounts of time. i searched it too and found the info. so can u. ;)

you need the front Civic EP3 badge and Integra DC5 badge.

the part numbers i think are:

75700 S5T E01
75701 S6M Z01

you should ask your honda dealer to check if these are correct, hope this helps

i can check my packages later and get back to you, if nobody else does, i got mine from icb motorsport and they fit, i saved the bubble wrap they came in to store my old badges, anyway the honda part number is on the pakages, so i will post later, or you can call icb motorsport, and im sure they will tell you.

can you say where you bought them from so we dont make the same mistake???




.

i will post the part numbers today around 5pm, est. when i get home from work.

Thank You very much guys,

I bought them on ebay, the seller is "kazespeed". I told them that they sent me the wrong parts, and they said they will contact Honda. But they just havn't reply me yet.

My 07 Fit was bought in Canada.

Thank You

the front badge is part# 75700-S5T-E01
the rear is part# 75701-S6M-Z01
bought them from icb motorsport for 35 dollars each.

i got mine from icb too ...i had to cut off the little tabs in the back and used some super glue for extra stickiness on fromt and rear and some elbow grease to push them on and it all worked out fantastic. Love it on the nbp......

Name Code Qty Each Options
------------------------------------------------------------
JDM Fit GD3 Type R Red H GD3009 1 34.97
Front Emblem
JDM Fit GD3 Type R Red H GD3004 1 34.97
Rear Emblem
Subtotal 69.94
Shipping 9.50
Tax 0.00
Total 79.44

i used a couple of extra strips of 3m weather proof industrial strength double sided tape for the back one the front one had full layer of sticky so that seemed to work fine for me. i also have nhbp. with 20% tint all around, mugen visors, jdm red H front and rear, jdm red dot fit emblem, just received my tanabe df210 springs, hope to install this weekend, and waiting for my laminx yellow tint for fogs to arrive, next will be exhaust, hid, and rims, then i will post some pisc, some time around january.

wow...

Thank You Very Much Guys,

You guys are soooo helpful!!!

the front badge is part# 75700-S5T-E01----ep3
the rear is part# 75701-S6M-Z01-----------dc5


this one is correct...combination of ep3 and dc5 red emblems