Project: asking for help
 

So since I have looked and can not find a very user friendly pinout for the GD3 I was hoping to create one. My only problem is I am dumb at reading wiring diagrams.

If I have someone help me out by disecting the pinout I can turn it into a diagram similar to the one below.

These are very helpful for any wiring that requires tapping the ECU.

example of the one from my 5g Mirage:

http://www.8bsp.com/forum/ecu_97_4G93.gif


So anyone feel like contributing to help me get one of these created for us?



Here is an example of how it can be used to simplify wiring processes. I created this as a tool for
wiring an SAFC to a 5g Mirage. It would allow me to make color coded diagrams for various things such as Emanage, SAFC Neo, various guages......etc
http://mirageinfo.net/safc_install1.jpg

Honda ECU Pin outs - HondaTech Australia Forums

there ya go man. hope this helps.

Awesome. Are these correct for USDM Fit's as well. I thought I read something about there being some differences. I don't have a problem doing both if there are differences. Just want to be clear.

well i used that chart to wire up my emanage and it worked so i am going to say that they are the same.

Ok cool. Last stupid question OBDIIA or B?