Honda Fit Sidemarker Template
Since I can remember, there has always been a huge demand not only on my part, but on numerous others for a template on the placement of the EDM/JDM Honda Sidemarkers. Well.... I just finish making this template for the sidemarker placement thanks to STTICH as I stole one of his photographs lol, and a BIG thanks to Evert aka Jazz styler for taking the time to take the measurements for us.
http://img.photobucket.com/albums/v4...sidemarker.jpg http://img.photobucket.com/albums/v4...idemarker2.jpg http://img.photobucket.com/albums/v4...idemarker3.jpg Also just to once more clarify, there are two different variations of the Honda Sidemarkers depending on country. The lower end models like the 1.3A and 1.5A in Japan came with the Clear Sidemarkers, where as some models in Europe came with the Amber Sidemarkers. Once I can track down some dimensions for the actual sidemarker hole, I will make up a template for it as well. :) |
Originally Posted by JDM_EK3
(Post 187375)
Since I can remember, there has always been a huge demand not only on my part, but on numerous others for a template on the placement of the EDM/JDM Honda Sidemarkers. Well.... I just finish making this template for the sidemarker placement thanks to STTICH as I stole one of his photographs lol, and a BIG thanks to Evert aka Jazz styler for taking the time to take the measurements for us.
http://img.photobucket.com/albums/v4...sidemarker.jpg Also just to once more clarify, there are two different variations of the Honda Sidemarkers depending on country. The lower end models like the 1.3A and 1.5A in Japan came with the Clear Sidemarkers, where as some models in Europe came with the Amber Sidemarkers. Once I can track down some dimensions for the actual sidemarker hole, I will make up a template for it as well. :) Wow now is when finally someone comes up with a template..wish i had this about 4 months ago |
Sweet! now i can get mine installed
|
And another BIG thanks to Evert aka Jazz styler for also informing me that the sidemarkers are to be installed in this fashion.
http://img.photobucket.com/albums/v4...idemarker3.jpg NOTE: Please note that Photobucket is being temperamental this evening, and you should see an image that was "borrowed" from ICB Motorsport with TWO directional arrows on it, and not just one. |
Thanks to Matt at ICB Motorsport, I was able to find out tonight that the EDM/JDM Honda Sidemarkers for the Honda Fit (GD3) are actually the exact same ones found on the JDM Honda Integra (DC5).
http://img.photobucket.com/albums/v4...idemarker2.jpg I then took and remade a Sidemarker Template I had found on ClubRSX.com to better match the previous templates I made. But of course with anything you find on the internet, you should use this template at your own discretion. With that said, using a piece of cardboard, cut it out before even remotely attempting to do this on your own personal vehicle to make certain of the fitment of the sidemarkers. |
My most recent install on Towelie's car
http://i3.photobucket.com/albums/y64...markers002.jpg http://i3.photobucket.com/albums/y64...markers004.jpg |
this is really good. it'd be cool to see the amber ones installed eventually too
|
Originally Posted by Jap 07 Fit
(Post 189558)
|
Originally Posted by JDM_EK3
(Post 189570)
Was this using the measurements just out of curiosity....? I cannot wait for my sidemarkers to arrive from ICB sometime this week hopefully. :)
|
This should be stickied.
|
Originally Posted by Jap 07 Fit
(Post 189682)
No actually i cut them with out the template.... i eyeballed them my self using an rsx template and just positioned them to where i thought they looked right...
|
came out just like mine and we eyeballed it ;)
|
Originally Posted by Crixtala
(Post 189708)
This should be stickied.
|
before cutting the hole, did u guys warm up the paint?
|
Originally Posted by jman245
(Post 193887)
before cutting the hole, did u guys warm up the paint?
|
I'm still putting forward the motion that this thread should be stickied. This is good information, and in 6 months when n00bs are too lazy to search for it, they can just see it at the top of the page. :D
|
What about wiring it up? I see that jdmland sells the DC5 amber kit with the socket and wiring.
|
Originally Posted by doctordoom
(Post 189565)
this is really good. it'd be cool to see the amber ones installed eventually too
Just need to do the install. |
how do you cut the fender? pardon me, i dont know a thing about body work.
|
I used a dremel. Yay for amber boo for the pic.
They aint crooked, its the pic. http://img155.imageshack.us/img155/6089/sidemfv6.jpg |
All times are GMT -4. The time now is 01:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands