placement of Jazz emblem
 

any measurements need to b taken? or do i use the original dot as a starting point? i kinda want to be on point before putting it in

I wanna know too!!

someone has to kno!! lol

Just estimate and place it level. You could always take a piece of blue tap place it under the Fit emblem to create a level.

take a look @ this mate :wavey::

http://img145.imageshack.us/img145/7...zemblemmw5.jpg
http://img145.imageshack.us/img145/j...jpg/1/w684.png

Fit on the US model (and anywhere it is marketed as the Fit globally) is on the Left side of the hatch, or drivers' side.
Jazz on Aussie models (and wherever it's marketed as the Jazz globally) is opposite - i.e. the U.S. spec passenger side.
Also, in some countries/regions where there are different motors and trims, that info goes on the opposite side.
So, I rebadged mine with a VTEC logo in place of the original Fit emblem, and the Jazz emblem is on the right (passenger side) I'm 99% certain this is the OEM setup.
The schematic above is mostly accurate, however it appears that both the Fit and Jazz emblems are on the same (right side) side, which is not always the case. If you google Honda Jazz, this should confirm the proper setup. As long as you purchase genuine Honda emblems, they will be contoured specifically for the shape of our hatch. I got my jazz badge from eBay (blue dot w/ brushed silver letters means vtec 1.5 and red w/ chrome letters means 1.3 i-dsi) and the proper vtec badge from password:jdm. Here They also sell the Jazz badges.

But at the end of the day, you can put the emblems where ever you want :cool:

what unit of measurement is that schematic?

they are mm

^^Yeah Metric system FTW!!!