Beat Sonic shark fin antenna Duran Duran
It is coming undone!
The 3M adhesive (or whichever brand/no-brand was attached to the base) is no longer....adhesing (hah!). It has not flown off yet, but the rear of the antenna can be picked up and shifted. Has anyone else run in to this problem? I followed the typical installation method - clean, alcohol wipe, remove backing on adhesive, then press with a lot of weight (but not too much...flimsy roof), and hold for as long as I can (before my kids come around and bother me). I am considering epoxy / super glue, but at the same time I may go back to the R/C-car look. |
Don't use epoxy or super glue! If you want to keep using it, go get a roll of 3m automotive grade double sided tape. Clean off the old tape, cut to fit and reapply. Then just keep an eye on it for replacement as necessary. I'd wager it'll be fine though. The automotive grade tape is tenacious stuff. They probably just used crap tape.
Otherwise go back to stock. If you do, I'll take your fin antenna. |
Originally Posted by sneefy
(Post 1410539)
Don't use epoxy or super glue! If you want to keep using it, go get a roll of 3m automotive grade double sided tape. Clean off the old tape, cut to fit and reapply. Then just keep an eye on it for replacement as necessary. I'd wager it'll be fine though. The automotive grade tape is tenacious stuff. They probably just used crap tape.
Otherwise go back to stock. If you do, I'll take your fin antenna. I will try to replace the double-sided tape. If that does not work, I will let you know about the fin. |
Silicone caulk? Or just vinyl wrap your roof with the antenna under the vinyl.
|
Oh, nice song reference, BTW. Though, 'ordinary world' is my fav on that album.
|
It goes to show our (or maybe just mine) age.
|
Our. That was about my Jr. year in high school.
|
Pretty much the same (Class of '96).
|
Nice. One year after me. Music was so angsty then.
|
cant ever keep from falling apart at the seams
cant ever keep from falling apart at the seams ...
mine is not there (yet), but I can def take a finger and poke at the antenna and see it "move" a bit. I'll eventually remove and replace with something with a high weight rating, like: (rated for 30 lbs, I believe this beats the 3m red stuff) Gorilla 6055001 Heavy Duty Mounting Tape, Double-Sided, 1" x 60", Black https://cimg3.ibsrv.net/gimg/www.fit...18ad5bbaf1.jpg |
Yeah, that'll likely work. Whatever you get, make sure it's rated for weather or outdoor use, else it disintegrate rapidly.
|
Thanks gents!
|
All times are GMT -4. The time now is 10:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands