2010 Fit Radio
Please read entirety before commenting. Thanks!
Changed battery - got Radio Code from dealer - put in code - said "code error" - confirmed code w/dealer (3 times!), also confirmed code online. Followed a couple of pieces of advice from this forum. FINALLY got radio to come on - w/in 2 minutes it goes off - can only restart if car turned off, then on. Again, radio on for 2 minutes then goes off. At my wits end! Do I need to pull out radio to verify serial # is correct? This is so frustrating and a huge pain!! Thanks for advice!! |
Solution?
I hope you can share your solution with me!!? The same is happening to me.
|
OP is about 2 years old...thought I would try here anyway.
Found radio code in glovebox. Tried to enter it...no luck. First problem is my code contains 2 zero's. Where is the zero button on my radio (2010 Base MT)?? I have 1-6, but no zero. The owners manual gives no details about the whole process. |
Originally Posted by steve37
(Post 1390347)
OP is about 2 years old...thought I would try here anyway.
Found radio code in glovebox. Tried to enter it...no luck. First problem is my code contains 2 zero's. Where is the zero button on my radio (2010 Base MT)?? I have 1-6, but no zero. The owners manual gives no details about the whole process. Unlock code is 5 digits. https://radio-navicode.honda.com/ |
Originally Posted by ezone
(Post 1390362)
You may have found a serial number instead of the unlock code.
Unlock code is 5 digits. https://radio-navicode.honda.com/ The prev owner had put the 6 digit number on the owners manual. I thought it was for the radio...maybe a key code? Looked and found the correct one on the side of the glovebox. Radio works good now. |
All times are GMT -4. The time now is 12:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands