Unofficial Honda FIT Forums

Unofficial Honda FIT Forums (https://www.fitfreak.net/forums/)
-   Fit Interior & Exterior Illumination (https://www.fitfreak.net/forums/fit-interior-exterior-illumination/)
-   -   LED headlights (https://www.fitfreak.net/forums/fit-interior-exterior-illumination/76282-led-headlights.html)

kered424 01-19-2013 05:27 PM

LED headlights
 
I've been searching this forum for almost half and hour, and still couldn't find the answer to my question, so here it is.

I recently bought an LED H4 headlight from ebay and wanted to do a side by side comparison of brightness with stock halogen bulbs. However, when I turned on my headlights, the LED bulb did not light up, whereas the stock bulb did. I took out the LED bulb and replaced it back with the stock, and both work. Switching sides (driver/passenger) or unplugging the halogen bulb makes no difference - the LED bulb doesn't turn on. Orginally, I thought the bulb was just damaged during shipping, but after hooking it up to an external power supply today, the LED bulb lit up. What's causing the LED bulb to not turn on when hooked up to my car (2012 Fit base)?

PS - I know that LEDs aren't bright enough for driving at night. I'm just playing with them for fun.

n9cv 01-20-2013 07:39 AM

This sounds like the light socket is wired for reverse polarity.. You might unplug the lamp and probe the lamp socket with a meter and to verify the polarity us correct. Normal bulbs do not care about polarity. LEDs do care. I know of one Japanese designed GM vehicle with 2 element bulbs that is wired that way intentionally. They put +12 volts on the lamp all the time and select the bright / dim on the ground side.

I do not have a Honda Fit wiring diagram to look it to see how they do it.

BlueBoogers 01-20-2013 08:10 AM

Just do a stock H4 connector pinout and match it up. Clearly it's polarity specific and you have a ground on the stock connector plugged to a positive terminal on the bulb.

kered424 01-20-2013 10:41 AM

Thanks for the responses. I tested it out this morning, and the polarity is indeed reversed.

breadtrk 03-08-2013 02:36 PM

So how is the brightness compared to a normal bulb?

kered424 03-09-2013 09:39 PM


Originally Posted by breadtrk (Post 1167388)
So how is the brightness compared to a normal bulb?

Horrible. It looks cool, but definitely do NOT drive with them at night.

riff42 03-22-2013 10:07 AM


Originally Posted by kered424 (Post 1167598)
Horrible. It looks cool, but definitely do NOT drive with them at night.

Kind of a given. Even if you happen to find a bulb that is bright enough, it will burn up due to lack of heatsinking, AND your headlights are NOT meant for anything besides a filament bulb. You'd have to invest in some high power LEDs and optics to achieve this.


All times are GMT -4. The time now is 07:06 AM.


© 2024 MH Sub I, LLC dba Internet Brands