Finally added some LED Running Lights.
5 Attachment(s)
Finally pulled the bumper off to tap into the parking lamps to throw on 2 strips of side emitting LEDs. I not overly 100% happy with the look, maybe I should have put the lights lower in the grill/bumper, but eh...it was cold, and it looks good. Now I don't have to waste hours on the headlight bulbs!!!
Attachment 88405 Attachment 88406 Attachment 88407 Attachment 88408 Next goal: High power 3-up Endor stars with Narrow optics, for deerlamps. Which the finished lamp is brighter than my V-Strom's headlamps with Silverstars in :-/ Attachment 88409 |
Add one more strip in the middle to make one continuous strip?
|
It's my wife's driver, and she said no, right before I added it. I think it would have looked even odder with one fulll strip.
|
Good lookin mini!
|
Where did you get the led strips?
|
Amazon....I think the seller was Uxcell, and they are simply 12v side emitting white.
|
1 Attachment(s)
I added some LED drl's earlier last month. I was originally going to put them underneath the headlights, but the groove between it and the bumper was too narrow, and I was too lazy to take off the entire bumper. So I decided to put it on top instead. It actually worked out quite nicely. If you pop open the hood, there's a perfect groove where you can tape the LED strips on the headlight units itself. And I think they look pretty good up top.
Attachment 88404 |
1 Attachment(s)
Originally Posted by kered424
(Post 1190592)
I added some LED drl's earlier last month. I was originally going to put them underneath the headlights, but the groove between it and the bumper was too narrow, and I was too lazy to take off the entire bumper. So I decided to put it on top instead. It actually worked out quite nicely. If you pop open the hood, there's a perfect groove where you can tape the LED strips on the headlight units itself. And I think they look pretty good up top.
https://i.imgur.com/9aLCLmy.jpg Attachment 88403 |
|
got any night pictures?...looks interesting
Originally Posted by kered424
(Post 1190592)
I added some LED drl's earlier last month. I was originally going to put them underneath the headlights, but the groove between it and the bumper was too narrow, and I was too lazy to take off the entire bumper. So I decided to put it on top instead. It actually worked out quite nicely. If you pop open the hood, there's a perfect groove where you can tape the LED strips on the headlight units itself. And I think they look pretty good up top.
https://i.imgur.com/9aLCLmy.jpg |
2 Attachment(s)
Originally Posted by TAFFY GE
(Post 1190699)
got any night pictures?...looks interesting
Attachment 88401 Without headlights on (still had some trouble with my crappy camera phone adjusting to the lights) Attachment 88402 With headlights on |
All times are GMT -4. The time now is 12:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands