Unofficial Honda FIT Forums

Unofficial Honda FIT Forums (https://www.fitfreak.net/forums/)
-   Fit Interior & Exterior Illumination (https://www.fitfreak.net/forums/fit-interior-exterior-illumination/)
-   -   Headlight Reflector Painting - HELP (https://www.fitfreak.net/forums/fit-interior-exterior-illumination/81223-headlight-reflector-painting-help.html)

Mixtape 02-04-2014 02:50 PM

Headlight Reflector Painting - HELP
 
Hey all, I've been a member here for a while but I just recently started my first "serious" project involving my GD3's headlights. I finally bit the bullet and got a full kit from TRS in Atlanta and am (or at least I thought I was) in the final stages of the whole thing. I had the reflector bowls and shrouds painted by a friend (who did it at night and in ~55*F) - I had not realized, until just a few days ago after looking at them in direct sunlight, that they are not nearly presentable, although you cannot see it in the photo. I obviously need to repaint them and I'm doing it myself.

My question is: should I use some sort of paint thinner on the shrouds and bowls, or sand all of them down and repaint? I obviously don't want to deform or damage the material underneath because they will be painted gloss black.

I'm a paint n00b but do appreciate any honest advice.
https://scontent-b-iad.xx.fbcdn.net/...31665816_n.jpg

Nomar 02-04-2014 07:30 PM

Just sand them down some until they are smooth. Clean really well and re-spray.

mr_RogerWill 10-27-2014 09:27 AM


Originally Posted by Mixtape (Post 1221876)
Hey all, I've been a member here for a while but I just recently started my first "serious" project involving my GD3's headlights. I finally bit the bullet and got a full kit from TRS in Atlanta and am (or at least I thought I was) in the final stages of the whole thing. I had the reflector bowls and shrouds painted by a friend (who did it at night and in ~55*F) - I had not realized, until just a few days ago after looking at them in direct sunlight, that they are not nearly presentable, although you cannot see it in the photo. I obviously need to repaint them and I'm doing it myself.

My question is: should I use some sort of paint thinner on the shrouds and bowls, or sand all of them down and repaint? I obviously don't want to deform or damage the material underneath because they will be painted gloss black.

I'm a paint n00b but do appreciate any honest advice.
https://scontent-b-iad.xx.fbcdn.net/...31665816_n.jpg

What size are those projectors?


All times are GMT -4. The time now is 01:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands