New 2015 DRL LED mod question
I have a new 2015 EX 6 speed. I purchased fog light bezels off eBay with the LED daytime running light built-in. Simple positive and negative wire coming off of them. Does anybody know how I would connect to these so they would turn on and off with the car? It would be cool if I could somehow disconnect the headlight daytime running light and have that power the LED running lights but I'm not sure if that's possible I think the only way to do it is to hook them up to an ignition wire so the Ron all the time. Let me know what you guys think
|
The daytime running lights working by using pulse with modulation to send an average 5 volts to the high beam filament of the headlight h4 bulb. 5 volts will not properly operate a 12v led. If you install leds to replace the halogen headlight bulbs you should remove the fuse for the drl function. There is a source of info somewhere on fitfreak.net indicating which fuse.
Aftermarket fog lights will run on 12 volts. I'm not sure where you should get your 12 volts from. Ideally I'd install a switch in the cabin. |
Originally Posted by Michael Raymond
(Post 1340677)
I have a new 2015 EX 6 speed. I purchased fog light bezels off eBay with the LED daytime running light built-in. Simple positive and negative wire coming off of them. .....
https://cimg1.ibsrv.net/gimg/www.fit...350af7adab.jpg 6500K for the fogs LED versus the 8-9000K with blue hue. |
Splice in with your running lights is what I would do if it were mine so you can just turn on the amber markers and have the LED's lit.
|
Originally Posted by breds2k
(Post 1388104)
Splice in with your running lights is what I would do if it were mine so you can just turn on the amber markers and have the LED's lit.
|
All times are GMT -4. The time now is 09:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands