Unofficial Honda FIT Forums - LED's Galore & ScanGauge with custom Mount. Lots-O-Pics

Hi, everyone. Figured I did enough MODs to warrant a new Pic post. I added a lot of new LED's and bought a ScanGuage with custom mount.:):vtec:

I have a lots of props and recognition to give along the way for either DIYs or hooking me up with the items.

I will start in order of installation:

The first 2 items I got from "Koolkevin1107" Here: https://www.fitfreak.net/forums/sale...-keyrings.html He also has a link in the same thread for DIYs.

First the Key ring LED.

Attachment 64061

Next up is LED Cup holders.

Attachment 64062

Attachment 64063

Here is a look at the LEDs under the Cup holder area:

Attachment 64064

The next few MODs were all from "Fit of RAGE" Here: https://www.fitfreak.net/forums/sale...-products.html He has a DIY in his sig for the Door Sill LEDs. The Foot well and any other you want to do are simple once you do the Door sills. I used the same LED strip. 6mm.

First the door sills:

Front Passenger From Above w/Flash:

Attachment 64065

Front Passenger From Above Wo/Flash:

Attachment 64066

Front Passenger ground level W/Flash:

Attachment 64067

Front Passenger Ground Level Wo/Flash:

Attachment 64068

Rear Passenger From Above W/flash:

Attachment 64069

Rear Passenger From Above Wo/flash:

Attachment 64070

Rear Passenger Ground level Wo/flash:

Attachment 64071

Driver side Foot Well:

Attachment 64072

Passenger Side Foot Well:

Attachment 64073

The last of the LED MODs I did was HVAC. Here is a good DIY by "billmus86" He tells you what lights to get and were: https://www.fitfreak.net/forums/fit-...iy-w-pics.html
Here are the HVAC Pics:

I made a change to the DIY since I already had the cup holder LEDs and used the LEDs on wires to light my holder area on the Meta kit below the radio.

Attachment 64074

Attachment 64075

I really like the end result with the LEDs. I did a lot of thinking were to put them and were to tap power from. With the Door Sills I used the recommended location in the DIY and they light up with the dome light.

I tied the foot well lights into the same location as the Cup holder lights under the HVAC area and they all light up with the parking lights.

The LEDs in the Metra kit holder area are tied into one of the HVAC LEDS as described in the HVAC DIY. It all came out very nice.

Lastly I bought a ScanGauge off here from “07fitsport" here https://www.fitfreak.net/forums/sale...tom-mount.html He made a custom mount which I modified slightly to work for my situation.

Here are the Pics:

Attachment 64076

Attachment 64077

Attachment 64078

Attachment 64079

It works perfectly. A great addition to the Fit. I love the way I was able to mount it. I almost have it all configured for my Fit. In the pic I have from top left: Batt VLT, Tank MPG, Instant MPG, and Instant HP. I am also able to use my GPS to verify that the MPH and Trip are correct on the ScanGauge. So far they are dead on. I am still working with it the MPG are not correct yet because I have not done a full tank or a fill up. There are so many other Gages as well. I also configured a TRIP mpg. So I will be able to see Instant, Trip, and Tank MPG all at once.

Feel free to ask any questions you may have.

Thanks,
Brandon.