![]() |
NEW BEST THREAD OF 2012.
Always love your car Gawa. Been following your coverage of the Japan trip since the beginning on your blog. |
Nice little collection of shift knobs, oil caps, and rad. caps you got going.
Been following your pics on some of the other forums. Noticed you went to TAS last year and this year. You work in the business? |
Thanks Mike! Didn't know you read my blog lol. How'd you find it anyway? o_o
Fitting: Nope, I don't work in the industry... just like Japan a lot so I keep going for vacation. |
I saw it on one of the other blogs I follow, I can't remember where.
|
So excited to see what you have in store :D
|
Originally Posted by mike410b
(Post 1077175)
I saw it on one of the other blogs I follow, I can't remember where.
Originally Posted by Fit4Trav
(Post 1078071)
So excited to see what you have in store :D
|
Small update... getting warmer around here so I swapped the tires off of the Loversouls and onto my temp wheels. Permanently retiring the Loversouls. I'll get some shots of the SSR's on the Fit once I take it out of storage in a week or two. :hyper:
http://farm8.staticflickr.com/7061/7...00e83d20_b.jpg http://farm8.staticflickr.com/7118/6...ff148dd8_b.jpg http://farm8.staticflickr.com/7051/6...89b5b0d5_b.jpg And on the side for the daily.. picked up a CSL trunk for cheap! :hyper: http://farm8.staticflickr.com/7097/6...e56631f9_b.jpg |
Im jealous of all the Japan trips you go on. Can't wait to see what you do this year.
|
Retiring the Lover Souls? :(
|
Yea.. I'll still keep 'em though. :)
|
Just brought the Fit out of storage this weekend and put a couple things on. :D
http://farm6.staticflickr.com/5321/7...03f32527_b.jpg http://farm6.staticflickr.com/5457/6...e1988809_b.jpg http://farm6.staticflickr.com/5035/6...754f2852_b.jpg http://farm8.staticflickr.com/7277/6...25dd207a_b.jpg http://farm8.staticflickr.com/7215/6...1ed65863_b.jpg http://farm8.staticflickr.com/7139/6...b417d801_b.jpg http://farm6.staticflickr.com/5076/7...77441dd6_b.jpg http://farm6.staticflickr.com/5349/7...e2f0cddf_b.jpg http://farm8.staticflickr.com/7203/7...6541b854_b.jpg |
Wheels look good and that seat is just too cool to put into words!
|
i have to know how did you wire in your jdm mirrors??
ive been trying to figure em out but no luck |
Originally Posted by mike410b
(Post 1089074)
Wheels look good and that seat is just too cool to put into words!
Need to get another bracket for the passenger side and I'll mount up the other bucket. But I don't think I'll end up doing that till the end of the season.
Originally Posted by fitster
(Post 1089158)
i have to know how did you wire in your jdm mirrors??
ive been trying to figure em out but no luck https://www.fitfreak.net/forums/134525-post33.html There should be 3 wires coming from each mirror for the power mirrors. The colours in that post didn't match mine though, but they matched the ones on my car. And for the blinkers, there's 2 wires, a power and ground. I just grounded to the door itself, and for the power wires, I tapped into the hazard switch. According to the pdf below (I don't remember where I found it but I have a bunch of wiring diagrams for the Fit), you'll need to tap into the green/red wire (pin 7) on the hazard switch for the left signal, and green/yellow (pin 10) for the right signal. https://docs.google.com/open?id=0B45...YmFPUFJXRllSZw I hope that kinda helps. :confused: |
Looking good! Nice to see the Fit still getting some attention.
|
Originally Posted by gawa
(Post 1089172)
Thanks! :D
Need to get another bracket for the passenger side and I'll mount up the other bucket. But I don't think I'll end up doing that till the end of the season. My mirrors are blinker only and don't have auto retract. I used this post: https://www.fitfreak.net/forums/134525-post33.html There should be 3 wires coming from each mirror for the power mirrors. The colours in that post didn't match mine though, but they matched the ones on my car. And for the blinkers, there's 2 wires, a power and ground. I just grounded to the door itself, and for the power wires, I tapped into the hazard switch. According to the pdf below (I don't remember where I found it but I have a bunch of wiring diagrams for the Fit), you'll need to tap into the green/red wire (pin 7) on the hazard switch for the left signal, and green/yellow (pin 10) for the right signal. https://docs.google.com/open?id=0B45...YmFPUFJXRllSZw I hope that kinda helps. :confused: sweet thanx alot man now i just have to find the time to get this done maybe in sept when the wife and kid are going away for a week hmmmm |
Originally Posted by inkster
(Post 1089680)
Looking good! Nice to see the Fit still getting some attention.
Hope to see you at the S&P meet? Are you still going?
Originally Posted by fitster
(Post 1089765)
sweet thanx alot man
now i just have to find the time to get this done maybe in sept when the wife and kid are going away for a week hmmmm Let me know if I can help in any other way. |
Originally Posted by gawa
(Post 1089815)
Thanks!
Hope to see you at the S&P meet? Are you still going? Also the Gumball 3000 rally arrives to Toronto on May 25th fyi. :D |
Originally Posted by inkster
(Post 1090054)
I'll definitely be there.
Also the Gumball 3000 rally arrives to Toronto on May 25th fyi. :D |
| All times are GMT -4. The time now is 06:30 AM. |
© 2026 MH Sub I, LLC dba Internet Brands