EricD's '17 Honda Fit Journey
 

Since I'm planning on keeping this car for a long time, I thought it'd be a good idea to start my own Fit Journey.
https://cimg9.ibsrv.net/gimg/www.fit...e3b7876abc.jpg

Before and after tint

https://cimg3.ibsrv.net/gimg/www.fit...0bd72cced3.jpg

LED reverse lights!

https://cimg9.ibsrv.net/gimg/www.fit...c6d7c8804.jpeg

First car wash

https://cimg9.ibsrv.net/gimg/www.fit...f1635ea70.jpeg

Took out Fit badge and dealership decal

https://cimg8.ibsrv.net/gimg/www.fit...056dcbd75.jpeg

Spend some time with my baby on Valentine's

Welcome to the fam.

Love the white ones, welcome!

Welcome to the forums.

Thanks for the greetings y'all! Researching the forums on projector retrofit. I tried to see if a LED kit would be OK to use but obviously light was scattered everywhere. So took those off the same night I installed.

Next mods are gonna be mud flaps and wind visors for sure. And in the future vinyl wrap the roof.

Yesterday I helped my friend install yellow fogs and HID on his accord. Looks so nice
https://cimg9.ibsrv.net/gimg/www.fit...851bcd52f.jpeg

Mud flaps!
 

Installedhttps://cimg4.ibsrv.net/gimg/www.fit...de0194269.jpeg
https://cimg6.ibsrv.net/gimg/www.fit...f7442ca05.jpeg
the mud flaps today. Rears was a plain but nothing too hard

https://cimg2.ibsrv.net/gimg/www.fit...be94e27883.jpg
https://cimg4.ibsrv.net/gimg/www.fit...56c9ac89e.jpeg

Been awhile
 

- Viofo A119 Dash Cam
- shark fin antenna from eBay
https://cimg2.ibsrv.net/gimg/www.fit...21b8c1bf43.jpg
https://cimg3.ibsrv.net/gimg/www.fit...c76f68a87d.jpg
https://cimg4.ibsrv.net/gimg/www.fit...bcc705b21f.jpg
https://cimg5.ibsrv.net/gimg/www.fit...eeadfcf84.jpeg

Do you have a link for the antenna? Does it work OK?

Here you go
 

9 Moon ABS Varnish Newest Design Special Functional Shark Antenna Car With Blank Radio Shark Fin Antenna For Skoda Octavia Fabia Superb Rapid Yeti 5 C https://www.amazon.com/dp/B00RCL0IFC/ref=cm_sw_r_cp_apap_zSPyVFTXw9lSj

Sorry I lied. Got it from Amazon. There are actually these brass thingies that come with it and it works even without attaching the things on the fin. I still attached the fin but it was funny that it still worked. I haven't noticed any lack of radio reception at all. https://cimg4.ibsrv.net/gimg/www.fit...a7af1998d3.jpg

Bye bye accord
 

Donating my accord for veterans today. I will miss her.
https://cimg9.ibsrv.net/gimg/www.fit...2fd54bc942.jpg

Kicked out of garage
 

Wifey and I decided my fit will be kicked out of the garage to house her dream car. Kinda mad. But not really. https://cimg2.ibsrv.net/gimg/www.fit...4885bb5341.jpg1991 Honda NSX

Sorry not sorry Fit... :rotfl:

​​​

Ah, wifey has good taste! Very nice! Every Honda fan should at least try to drive/own one of these in their lifetime. There is nothing like the transmission/engine combo in this pinnacle of Honda engineering. Enjoy, and I'm sure you both will!

No new mods but wifey let me take out the NSX. No power steering on it is kind of a pain. Not used to it. https://cimg8.ibsrv.net/gimg/www.fit...5e1e02717d.jpg

First sticker put inhttps://cimg2.ibsrv.net/gimg/www.fit...3f88ae133.jpeg

Blinking Brake Light Install


https://cimg0.ibsrv.net/gimg/www.fit...57aeb55cc6.jpg
Open this area to expose the wiring.


https://cimg4.ibsrv.net/gimg/www.fit...8f2e565d29.jpg
This is what it should look like when you take out the rubber cover. But if you pull the wires down even more you should see there's another set of wires that shift towards the right going to the third brake light.


https://cimg6.ibsrv.net/gimg/www.fit...789407989e.jpg
There was some sleeves around the teal and black wire and this is what it looks like when the sleeve is removed. I cut the 2 wires and connected the blinking brake light module.


https://cimg8.ibsrv.net/gimg/www.fit...ec91d669d3.jpg
Another pic showing where the wires lead to. Painted in blue is a bunch of wires that go to brake, reverse, turn signal etc. In green is your third brake light wires.


https://cimg4.ibsrv.net/gimg/www.fit...e09a209ae7.jpg
On the module there's an "in" and an "out". Out goes to the brake light and in is coming in from the battery???!? i guess. I've never done wiring before but it was pretty easy to do, just nerve wrecking as hell.

I'm not the best at writing how to's but I hope this helps.

Thanks for sharing your install, Eric! :thumbups:

Agreed! Where did you tuck the little module afterwards?

Hey, I tucked it back in that hole after I heat wrap and electrical taped it

OK I figured you did but wanted to double check. Very cool mod!