help
well for a GD3 let me tell you that this tire size is huge, but stock offset is +45
if you have a GE8, 14" never was an option (i could be wrong) but if i recall (forgive the if's, i've never owned a GE8) it was +50 offset
if you're going with 14 on a 2009-2012 check the brake clearance as very few rims will clear them...
if you have a GE8, 14" never was an option (i could be wrong) but if i recall (forgive the if's, i've never owned a GE8) it was +50 offset
if you're going with 14 on a 2009-2012 check the brake clearance as very few rims will clear them...
New Member
Joined: Nov 2011
Posts: 7
From: Saipan
Huge but works, although
I'd drop back to the 65 aspect ratio and lose a tad of height if I did it again.
Then rub would most likely be a non-issue.
Dec 24 I'll be home for 2 weeks and will be able to pook & see where the rub is & what the offset is (stamped on the steel wheel somewhere, I've been told) 45 sounds right. Just need to make sure and see where the rub is to know what direction to go. It only does the rub with me (245 #s) in the drivers seat, with my wife (94 #s) in the drivers seat it NEVER rubs. Maybe if I lost about 55 #s it wouldn't rub. Since I last drove the car I've lost 15 #s, only 30 #s more to go.
Thanks for staying with me on this one, I know that I am opposite of a strong trend. Just so they all know, my 72 Mustang is lowered 2"s with lowering springs from Eaton. This is being done purely to keep from having to repair the plastic under the front bumper & engine/transaxle area for the 3rd time.
Then rub would most likely be a non-issue.
Dec 24 I'll be home for 2 weeks and will be able to pook & see where the rub is & what the offset is (stamped on the steel wheel somewhere, I've been told) 45 sounds right. Just need to make sure and see where the rub is to know what direction to go. It only does the rub with me (245 #s) in the drivers seat, with my wife (94 #s) in the drivers seat it NEVER rubs. Maybe if I lost about 55 #s it wouldn't rub. Since I last drove the car I've lost 15 #s, only 30 #s more to go.
Thanks for staying with me on this one, I know that I am opposite of a strong trend. Just so they all know, my 72 Mustang is lowered 2"s with lowering springs from Eaton. This is being done purely to keep from having to repair the plastic under the front bumper & engine/transaxle area for the 3rd time.
Last edited by ejh357; Dec 3, 2011 at 09:48 AM. Reason: clarification: added the last three sentences
New Member
Joined: Oct 2011
Posts: 16
From: virginia
sol you are a douchbag if you would learn to read you would know whats goin on now. sorry im not goin to pretend that i like the car cause im a truck a Chevy truck person not an import person. but i do enjoy customization and figured id try something new. so get over your self. if you have noticed me and cr4zy3lgato have got things straight now and i have appoligized for makin yall pissy. but now im just askin for some help on some info about some sites so i know where to go cause i dont have any idea. so if you want to say im of topic you might want to learn to read. if you would just be helpful like cr4zy3lgato that would be nice.
cr4zy3lgato i know this is a set back but come on i was tryin until this sol guy is still wanting to be a db after i put everything back and tryin to have some interest in these car cause it is customization.
cr4zy3lgato i know this is a set back but come on i was tryin until this sol guy is still wanting to be a db after i put everything back and tryin to have some interest in these car cause it is customization.
Thread
Thread Starter
Forum
Replies
Last Post
phenoyz
2nd Generation GE8 Specific Wheel & Tire Sub-Forum
4
May 14, 2011 05:39 PM
