NEW RELEASE - JDP GE FULL Carbon fiber replace rear spoiler!!!!
#24
unbolt the spoiler just pull off the spoiler with even force (tabs are pretty strong)
thats how john and i did it when we installed the jdp spoiler
thats how john and i did it when we installed the jdp spoiler
Last edited by jdmsneakerhead; 10-15-2009 at 10:00 PM.
#25
#26
No way! GDs are so, well, "Old Skool" now! Get a GE... they Rule now!
Ok, this is twice I've done the GE/GD thing in as many days. Just kidding, of course! I couldn't resist the chance.
Actually, there's finally something for the GE the GD can't get. Should I be gloating about that?
Ok, this is twice I've done the GE/GD thing in as many days. Just kidding, of course! I couldn't resist the chance.
Actually, there's finally something for the GE the GD can't get. Should I be gloating about that?
With that said, keep it up JDP. You're doing wonders for us GE owners. We're the future of the fit community!
#27
#29
im in tha same situation im saving for the front lip also.. looks like the spoiler is next lol
#30
this is what it looks like under the tab, that's the bolt you'll need to take off, along with the bracket (just rotate the bracket with some needle nose pliers to loosen it, then just give it a good pull and it should come off)
STOCK Vs. JDP... big difference
there are four of these keeping the stock spoiler in place
enjoy!
again, this isn't a full write-up cause JDP includes (good) instructions.. i can try and answer questions if they should come up regarding the wing install though.
note: i hit myself in the face with the spoiler while pullint it off.. be careful
#31
good info but... hahhaah that was funny .. hopefully it didnt hurt to bad
#32
#34
Join Date: Mar 2009
Location: Alhambra/Pasadean CA
Posts: 494
#35
Join Date: Mar 2009
Location: Alhambra/Pasadean CA
Posts: 494
Thanks for the comparison pictures...the wing looks really good on white.
Many thanks for the support!!!
Many thanks for the support!!!
the wing includes instructions, but i hope these pics help
this is what it looks like under the tab, that's the bolt you'll need to take off, along with the bracket (just rotate the bracket with some needle nose pliers to loosen it, then just give it a good pull and it should come off)
STOCK Vs. JDP... big difference
there are four of these keeping the stock spoiler in place
enjoy!
again, this isn't a full write-up cause JDP includes (good) instructions.. i can try and answer questions if they should come up regarding the wing install though.
note: i hit myself in the face with the spoiler while pullint it off.. be careful
this is what it looks like under the tab, that's the bolt you'll need to take off, along with the bracket (just rotate the bracket with some needle nose pliers to loosen it, then just give it a good pull and it should come off)
STOCK Vs. JDP... big difference
there are four of these keeping the stock spoiler in place
enjoy!
again, this isn't a full write-up cause JDP includes (good) instructions.. i can try and answer questions if they should come up regarding the wing install though.
note: i hit myself in the face with the spoiler while pullint it off.. be careful
#36
and iirc, for those curious (as i was)
stock wing weight (about) 32 oz.
jdp wing weight (about) 70 oz.
#37
is there any weight savings vs the OEM?
Also do you guys have a CF hood for the GE8? I would be al over both things at the same time if you do..
Thanks
Also do you guys have a CF hood for the GE8? I would be al over both things at the same time if you do..
Thanks
#38
Join Date: Mar 2009
Location: Alhambra/Pasadean CA
Posts: 494
No weight savings....our wing is much larger, which in turn weighs more.
Sorry....I don't have plans to make a carbon hood.
#40