Anyone running Azenis with 38 offset rims?
 

I'm really under the impression that they will rub but not sure. I know that the Azenis are typically wider than other brands. I've got a 16 x 7 rim that's 38+ offset and I want to use a 205/45/16. Anyone else using this setup?

i have that exact setup but NOT azenis. i rub in the front on turns and bumps. i did the fender liner trick and still some rubbing on hard turns

they don t make azenis in 205/45/16

You're right. Sorry it's 205/40/16 but the width will stay the same. Does anyone agree about Azenis being wider and if there is any rubbing at all currently then I probably shouldn't use the Azenis? ( even though I want to soo bad! ) :)

They dont run wider.... theyre just a different shape.. azenis are more square for ex. [] the falken Ziex is more circular () anywho you should be good with a 205/40

Dig it!

Thanks guys!:D

205/45x16 works well on 42 mm offset stock ride height or 45 mm when lowered. Go less than those offsets and you almost guaranteed risk of rubbing