Interest check for Noblesse Diffuser
Anybody interested in the Noblesse diffuser? Replica FRP will be available maybe early or mid Sept.
Original piece is US$407 excluding shipping. Pricing for the replica is US$200 excluding shipping. This will only fit Type S rear bumper. http://www.club-miniban.com/fit_r_d.html http://i196.photobucket.com/albums/a...se/49941-1.jpg Feature With the part which rectifies the air under the rear, it is possible to be able to obtain the effect in the aerodynamics. In addition, because inside the rear bumper (reverse side) the air becomes difficult to involve, the aerodynamic drag which is in the midst of travelling is lightened. (There is a function which prevents the parachute effect) In addition, it considers also practicality,extension to lower direction is stopped inminimum. * Even with muffler installing of shell タイコ whose this corporation is thin, from muffler position with the lower direction fence serving There are no times when it impairs largely in the practical aspect. S grade (MC later) genuine rear bumper private design * In genuine bumper of other grade installing failure http://i196.photobucket.com/albums/a...esse/67791.jpg http://i196.photobucket.com/albums/a...esse/5bf31.jpghttp://i196.photobucket.com/albums/a...esse/581e1.jpg http://i196.photobucket.com/albums/a...esse/71f11.jpghttp://i196.photobucket.com/albums/a...esse/d3c11.jpg http://i196.photobucket.com/albums/a...esse/b8051.jpghttp://i196.photobucket.com/albums/a...esse/fb711.jpg With respect to the picture left: 10001, the air entering into ディフェーザー, it is discharged from the aluminum mesh duct of center. With respect to the picture right: The imitation tow hook the case of installation, at expanding the mouth of the tow hook installing possibility. In the picture left: In order to prevent the fact that the damage is done to the bumper, the private rubber mall has belonged. In the picture right: The muffler open part is designed complying with the form of the genuine bumper. Under the picture left: As for installation, way other than bis, it can lock even with the genuine rear bumper clip, the design. Under the picture right: With the design which is adjusted to body body form, the parachute effect is prevented. * Parachute effect To rear bumper reverse side by the fact that the air which is in the midst of travelling hits, becoming the circumstance like the air brake. That wind (the air) resistance being something which exceeds the imagination, has become big travelling loss. By the fact that this ディフェーザー is installed, it is possible to decrease the big loss. http://i196.photobucket.com/albums/a...70818086b1.jpghttp://i196.photobucket.com/albums/a...0708180811.jpg Unless リアディフェーザー is installed, the area of this much rear bumper reverse side has been visible. Because there is also rear bumper and an opening of the body, it is unable to become also that the air involves to bumper reverse side. * The above-mentioned リアディフェーザー non picture is photographing with the genuine S bumper. http://i196.photobucket.com/albums/a...70818089b2.jpghttp://i196.photobucket.com/albums/a...0708180931.jpg When リアディフェーザー is installed, rear bumper central part reverse side almost hides. Because the rear bumper and the opening of the body decrease, you lighten also the fact that the air involves to bumper reverse side. Especially, if it becomes big rear bumper aero it extends to lower direction also the extent loss which becomes becomes large. |
Wow its very nice dude. ;)
|
Nobody interested? :confused:
|
The USDM Fit does not come with the Type S bumper.
|
Originally Posted by smeister
(Post 169600)
The USDM Fit does not come with the Type S bumper.
|
The diffuser is nice, but I likewise don't think it fits the longer USDM bumper.
|
i dont think are cars go fast enough for it to be that big of a deal
|
if you made it fit the USDM bumper then yes i woudl be interested.
|
Originally Posted by Solscud007
(Post 170935)
if you made it fit the USDM bumper then yes i woudl be interested.
|
How does the rear USDM bumper look like?
Nobody does Spoon or J's replica over there since there's no Type S kit? |
Originally Posted by Solscud007
(Post 170935)
if you made it fit the USDM bumper then yes i woudl be interested.
|
Originally Posted by carbonseller
(Post 170947)
How does the rear USDM bumper look like?
Nobody does Spoon or J's replica over there since there's no Type S kit? here is a picture of the rear. http://phxhomeimprovement.com/fit/fit3.jpg |
Originally Posted by Solscud007
(Post 170977)
|
|
That's nice but it won't fit the USDM front end and the usdm rear is the base fit body with a lip kit for the sport.
|
Updated price.
|
I would make it fit, those pieces are sick!
|
it really shouldnt be hard to get it to fit
|
Need 5 interested to get start the GB :)
|
How much for the front bumper and the rear diffuser shipped to the UK.
|
All times are GMT -4. The time now is 04:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands