|
Looking real good i wish i could do that to my ef hatch inside and out, i just realized looking at the beginning picks it is the same one i saw on k20a.org... i remember because the carbon dash
|
AWESOME!
I am about to start stripping my CRX Si. I just wish I had your budget and resources($$$$$$$$$$$$!). I am doing it myself with couple of friends with almost no money in an apartment complex single car garage! I must stay with original engine with DC headers, JG cam, custom 2.5" exaust with hollowed cat, koni yellow's with Kg/mm springs, ST sway bars, Crane cams ignition computer and coil, Magnacor wires, Spoon/Mugen chipped ECU, Momo F1 steering wheel, 15x7 OZ Racing wheels..... You get the picture - poor mans racing car. I will strip it as much as I can, remove all glass and sunroof and put plastic windows. I have two intake manifolds, so I will attempt to fuse them together and run two cylinders per one throttle body and ram air them through headlight openings or create hood scoop the width of the hood between headlights. I have 12 ton pipe bender, so I will be making my own roll cage that will extend into engine compartment for stiffness. I have no experience in building a race car, so I am going by common sense and web research. Goal is to have fun on the track and let my helping friends drive it too. If anything more evolves from it, great! I am concerned that home built roll cage won't be approved for the track even if I overbuild it. If I am not mistaken, front windshield has to remain glass for road racing, too. Please feel free to educate me! Any tips and tricks you can share. I appreciate it very much! Ivan |
i feel sorry for those bfg's lol.
btw. what header is that? nice build! |
DTR Header ceramic coated by us.
|
Damn that CRX is stripped.
Ivan, Good luck on your build! It wont beat an R8 on the track lol, but it will be a blast! |
Originally Posted by Hocker
(Post 202417)
DTR Header ceramic coated by us.
|
Originally Posted by k20a2fast4ya
(Post 202497)
the ceramic coating threw me off lol. DTR/SSR FTW!
|
Originally Posted by Hocker
(Post 202608)
Yea I wanted a little bling. As far as a track car it will definately run 11's if not maybe get into the 10's in the 1/4 and its definately got the suspension to run on the track. Still my pride and joy!
|
Originally Posted by k20a2fast4ya
(Post 202650)
good luck! whats the set up? i pulled a 1.57 60ft with stock struts and skunk 2 drag springs in the rear and skunk 2 coilovers in the front. in my k20a2 eg
|
whats the motor set up?
|
K24 bottom end, AEBS sleeves, k20 head w/crower stage 3 cames, RLZ everything else. Hayward ITBS
|
Nice build...does anyone know if a k24 can fit within the fits? sorry....i just found the super street challenge fit...i saw some k24 engine mounts being sold for the fits on jhpusa, but has it ever been done, besides extreme dimensions in the super street challenge?
|
i dont see why not, the 24 sits about 2inches lower than the 20
|
sick more pics!lol
|
What's that?...shifter karts and a duce in the background? Lotsa bases covered there!
|
Originally Posted by cheffyjay
(Post 203272)
What's that?...shifter karts and a duce in the background? Lotsa bases covered there!
|
that is the hotness.
|
Originally Posted by kennef
(Post 203427)
that is the hotness.
|
Originally Posted by Hocker
(Post 203449)
Thanks, it has taken a lot of work and time but well worth it.
|
| All times are GMT -4. The time now is 11:19 AM. |
© 2026 MH Sub I, LLC dba Internet Brands