Unofficial Honda FIT Forums - Project: ThunderChicken

Unofficial Honda FIT Forums (https://www.fitfreak.net/forums/)

- Other Car Related Discussions (https://www.fitfreak.net/forums/other-car-related-discussions/)

- - Project: ThunderChicken (https://www.fitfreak.net/forums/other-car-related-discussions/74364-project-thunderchicken.html)

Project: ThunderChicken

Buddy of mine picked up a 79 Trans Am that used to be a Radial Tire Drag car.

Originally an all motor Big Block Chevy 454" puttin it down through a TH350 trans and a Strange 9" rear on 28" DOT Radials.

New setup is a total budget build... what we dropped in yesterday is a High Comp 350 Small Block, unknown cam, Holley 4 barrel adapted to a spread-bore Q-Jet intake with a Single Plate jetted for 150 shot of spray. Switched the TH350 to a TH400 transmission and a 4.10 rear gear with 26" ET Street Radials.

Lookin for 11s on spray! Trying to talk him into a second hand 80mm T6 turbo I have at my disposal, bigger cam a loose converter.. and just using the spray to get up on the converter and go for 9's @ 145mph+ because it already has a cage.

http://imageshack.us/a/img826/6800/thunderchicken1.jpg

http://imageshack.us/a/img717/4813/thunderchicken2.jpg

http://imageshack.us/a/img99/2752/thunderchicken5.jpg

http://imageshack.us/a/img525/6626/thunderchicken3.jpg

http://imageshack.us/a/img17/2829/thunderchicken4.jpg

The 350SBC looks absolutely tiny down in there compared to the 454 or even the 6.6 that came from the factory!

http://imageshack.us/a/img513/6305/thunderchicken6.jpg

Is that the one that came with a 6.1L (or was is a 6.9L) from the factory? Or was that the Camaro?

I almost bought one when I was 18.... thank god I didn't. :D

Attachment 23314
Drive to texarkanas pick up 400 cases of coors and back in 28 hours. ... didn't even flinch :D

Quote:

Originally Posted by FitStir (Post 1133946)

Is that the one that came with a 6.1L (or was is a 6.9L) from the factory? Or was that the Camaro?

I almost bought one when I was 18.... thank god I didn't. :D

This was the Pontiac (403") 6.6 with all the bells and whistles originally. The 1980 Camaro is basically the same car though and if you look on the cradle there's a bunch of bolt patterns for all the different mounts.

Quote:

Originally Posted by joey_fits (Post 1133970)

http://i1123.photobucket.com/albums/...ps3673e569.jpg
Drive to texarkanas pick up 400 cases of coors and back in 28 hours. ... didn't even flinch :D

Bwahaha ya I bought him a 10gal hat to go with it, only fits with the T-Tops off.

Hopefully have some more shots soon.

Got a bunch of fun projects in the works.

Thanks for the clarification... 6.6L it was.. and a 79.

My uncle had a late 70's Camaro modded with the exhaust running along the sides of the car, quite a few family members burned their legs getting out of the car... memories.. lol Those cars were all over the place back then.