Yellow 1994 Integra
#401
01-21-2018, 04:33 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Project#2
Yes it's finally on the car. After like 4 months, it was in the weather, lol.
And now it's back under the covers for a little nap!
Yes it's finally on the car. After like 4 months, it was in the weather, lol.
And now it's back under the covers for a little nap!
Last edited by Perrenoud Fit; 10-02-2018 at 01:28 PM.
#402
01-21-2018, 06:41 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Hope it's a little warmer in Chicago land.
It was like a festival today, went to Norfolk and the police where directing traffic and as I went by he told me " nice car"
Made my day : )
It was like a festival today, went to Norfolk and the police where directing traffic and as I went by he told me " nice car"
Made my day : )
#403
01-21-2018, 07:25 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
On eBay can make a custom banner for your car too.
Last edited by Perrenoud Fit; 01-21-2018 at 07:35 PM.
#405
01-27-2018, 07:57 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Having thoughts about forced induction for the LS.
The Teg is great just needs more power. 230-250 hp is what I'm looking at.
Not crazy but if the car looks fast then it should be fast.
The Teg is great just needs more power. 230-250 hp is what I'm looking at.
Not crazy but if the car looks fast then it should be fast.
Last edited by Perrenoud Fit; 01-28-2018 at 10:11 AM.
#406
02-09-2018, 05:36 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Last edited by Perrenoud Fit; 02-09-2018 at 05:38 PM.
#408
03-18-2018, 02:12 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Yellow high beams
Tried my hand at headlight tinting. Truned out good but would advise you try this with the temperature above 50 degrees.
Last edited by Perrenoud Fit; 03-21-2018 at 09:30 AM.
#410
03-26-2018, 07:40 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
The car was pretty much OEM when I bought it. Kinda
It's been a great project and all kinds of fun fixn it up.
#413
04-18-2018, 08:25 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
#414
04-19-2018, 04:40 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Front lip
I'll count up as spring fever. Got an eBay 30.00 urathane lip figured can't loose at that price.
So sanded 80 on the edges as they were pretty ruff and the rest with 320-400.
Cleaned with TSP and warm water. Wiped down with wax and oil remover.
Blew off wiped again and sprayed with addhesion promoter.
Tack color coat and 2 med. coats afterwards.
Waited about 15 mins. at 74 degrees.
Mixed flex additive, fish eye eliminater, to 4/1 clear.
And I'm hoping it won't chip. Shouldn't with the flex additive.
So sanded 80 on the edges as they were pretty ruff and the rest with 320-400.
Cleaned with TSP and warm water. Wiped down with wax and oil remover.
Blew off wiped again and sprayed with addhesion promoter.
Tack color coat and 2 med. coats afterwards.
Waited about 15 mins. at 74 degrees.
Mixed flex additive, fish eye eliminater, to 4/1 clear.
And I'm hoping it won't chip. Shouldn't with the flex additive.
Last edited by Perrenoud Fit; 04-19-2018 at 08:43 PM.
