2000 GSR Integra
#161
Refinished A center cap. 2.25"
I can't find these anywhere, so me being the refinisher
I cleaned them up. Touched up the black and wet sanded .
clear coat x3 wet saned and buffed out.
not like nib but pretty close!
Last edited by Perrenoud Fit; 04-14-2019 at 09:46 PM.
#163
Rear strut brace.
Looking for an OEM rear itr strut brace but no luck!
So think, think, think! A distant memory came to the surface. At around 10 o'clock last night a rear strut bar is located in "the stash". Today along with other obligations I found a little time to try and get this EG bar to resemble an itr bar.
Looking for an OEM rear itr strut brace but no luck!
So think, think, think! A distant memory came to the surface. At around 10 o'clock last night a rear strut bar is located in "the stash". Today along with other obligations I found a little time to try and get this EG bar to resemble an itr bar.
Last edited by Perrenoud Fit; 04-20-2019 at 11:20 PM.
#165
Installed & lookin good
It was fun, free and now I can take those corners at 30mph lol.
But it'll show well at the sumospeed night ; ^ )
Last edited by Perrenoud Fit; 04-21-2019 at 08:10 AM.
#166
Measure 3x cut once.
thanks to Team Integra. Net and sufer x for the idea of cutting the (spare!) covers for a clean install.
Last edited by Perrenoud Fit; 04-23-2019 at 09:33 PM.
#167
Changed the oil and filter yesterday.
Used a great product call Motorkote with Mobil1 synthetic 5-30.
13 oz of mk and 3.5 qts m1.
Holy molley what a difference quite #1, and in 1st gear it has always wanted to lurch a little, but today no lurching in morning traffic! I was surprised. Power was the best its ever been. For 23.00 for the oil and 25.00 for the additive and another 10 for the filter, for my car it was money well spent.
The motorkote can treat up to 4 - four cylinder motors, 2oz. per qt.
Used a great product call Motorkote with Mobil1 synthetic 5-30.
13 oz of mk and 3.5 qts m1.
Holy molley what a difference quite #1, and in 1st gear it has always wanted to lurch a little, but today no lurching in morning traffic! I was surprised. Power was the best its ever been. For 23.00 for the oil and 25.00 for the additive and another 10 for the filter, for my car it was money well spent.
The motorkote can treat up to 4 - four cylinder motors, 2oz. per qt.
Last edited by Perrenoud Fit; 04-30-2019 at 11:35 PM.
#169
Explanation of ignition timing and how it affects your engine.
https://www.superhonda.com/forum/f55...-268106/?amp=1
https://www.superhonda.com/forum/f55...-268106/?amp=1
#170
Torque Mirror Shine 8 oz. Amazon 20.00, good results, bad spray nozzel. Original 20 year old paint. Finally got the gloss to come back.
Last edited by Perrenoud Fit; 08-25-2019 at 08:19 PM.
#171
Friday was treasure day at pnp. Set of tails, package tray cover set of headlights.
1998 Integra tail lights getting buffed out.
And painting an engine stand that my buddy let me borrow. Always give borrowed tools back better than received. ; ^ )
1998 Integra tail lights getting buffed out.
And painting an engine stand that my buddy let me borrow. Always give borrowed tools back better than received. ; ^ )
#175
Torque Details Mirror Shine
It's a great product, expensive but if you want a new paint look this really works!
This paint on my teg is original, no repairs, and it's 20 years old. Not always kept up with. I suspect the grandson didn't wash or wax the car. So there are blemishes from bug guts are all over the front end. But it's still the original paint. I've buffed, waxed ,ceramic waxed it.
But the combo of armorall smooth as butter and mirror shine on black paint is hard to beat.
It's a great product, expensive but if you want a new paint look this really works!
This paint on my teg is original, no repairs, and it's 20 years old. Not always kept up with. I suspect the grandson didn't wash or wax the car. So there are blemishes from bug guts are all over the front end. But it's still the original paint. I've buffed, waxed ,ceramic waxed it.
But the combo of armorall smooth as butter and mirror shine on black paint is hard to beat.
Last edited by Perrenoud Fit; 09-13-2019 at 06:52 AM.
#177
ITR front lip
Bayson R makes great fitting parts for a lot of manufacturers.
No heat gun, if it states that in the description keep looking.
No heat gun, if it states that in the description keep looking.
Last edited by Perrenoud Fit; 10-12-2019 at 08:12 PM.
#178
Window vent shades
These are EOS cheap price, great fit. But the edges are pretty ragged, not very noticeable after in place. They use the best double sided tape! They stay in place.
And really close to OEM at a glance. Which are 500.00 nib price. : ^ 0
Last edited by Perrenoud Fit; 10-12-2019 at 08:23 PM.