OK, Heres the deal. I have been in contact with the people at Skunk2 that can make this happen for us! This kit is based off of the Kit used for their Fit-R from street tuner challenge. I myself am taking the initiative to make this start moving forward. We had the other interest thread, but now we need to make this happen! The kit i was told is going to be in the $600 range, the cheapest so far!
What I need from you is to post NOTHING MORE than your FF name and real name. When finished posting send me a PM with the same + your phone number. I will be compiling a list and getting it to the Guys at skunk2 that way this kit can launch! Lets get this going guys!
Quote:
|
Originally Posted by skunk2.com
The kit will include:
Rear Calipers, Pads, Hard brakelines, Soft Brakelines (Stainless Front and Rear), Spindles, Hubs, E-Brake cables.
This kit is straight forward bolt-on replacement that retains the use of ABS and has been tested on the racetrack and on the street.
(Actual product may vary)
|
1.(JDMchris.com)Chris Aguirre
2.(burningwrek) Dustin Ryan
3.(aliencowboy) Gary Edwards
4.(KoolKevin1107) Kevin Kaveh
5.(manxman) Dave Kermode
6.(sy11580) Stanly Yeung
7.(itfits12) - Bryan Olson
8.(kelsodeez) - Kelsey Mayer
9.(zer0sk8ordie) - frank manharth
10. john brito
11.(Steeldog) Joe D. Lee
12.(junior40er) Adrian
13.(kid vtecnik) Josh Soriano
14.(GD3-Fit) Ricky Granozio
15.(fit4kris) Kris Poff
16.(Wytt) Wytt Lusanandana
17.(Fittogo) Jun Melchor
18.(blazinorange) Ethan Taylor
19.(duheeat) Jason Gourley
20.(EnthusiastMan) John West
21.(EGvsEM) Micheal Mollinea
22.(TOOL) Tyler Hughes
23.(t3chn0rav3rb0y) Mark Destura
24.(thejroisgo) Jason Romine
25.(Fit Ippo) Vu Nguyen
26.(fit2bcrazed) Stephen Dang