Quote:
Originally Posted by niko3257
who ever does it post up your pics here so we can all see.
|
Since you asked!
- just did my headlights with a charcoal metallic grey. I've done several sets of headlights over the years, and decided that the grey looks a little more OEMish... it's all in my head, but anyway... from far away they look black. Here are the pics:
If I had to give advice / tips:
* I used 250F for my oven temp, and it was plenty to get my lights apart
* the reflectors come out easily if you pop them out from the backside with your thumbs. You might have to pull and twist the chrome (gently) a bit but they will pop out without tools.
* when you reinstall the reflectors, you'll need to press them back in over the new paint. Again if you use a little enginuity you can press these back in without scratching the paint
* my thought is that a lot of people paint these headlights and then bake them back together in a half hour. LET THE PAINT DRY. The condensation problems that people are having can also come from moisture within the paint. I let mine dry for a half hour, then put my painted housings back in the oven at 200F for 5 minutes, then put them outside in the sun for two hours before putting everything back together.
* don't paint these on a humid day, or a rainy day
* I pressed everything back together, put them in the oven for 5 minutes to get the sealant all gooey, then took them out, reinstalled all the screws (snugged them up, didn't gorilla tighten them) to pull everything together a little tighter, then put them back in the oven for another 5 minutes. Pulled them out again and I could get another 1/4 turn on all my screws.
That's all I got - enjoy.
Linear Mode
