2nd Generation GE8 Specific Fit Photos & Videos Sub-ForumThreads for displaying photos and videos of the 2nd generation GE8 Honda Fit
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
San Diego has been more hotter than usual since yesterday. We've been hitting 100+ degrees here (which is normal for some of you haha) so because of the heat, I decided I'd finally get the car tinted. I ended up with Llumar ATC 20% tint on all 9 windows and no windshield strip. I was originally going for 35% tint but changed my mind when I saw comparison pictures between 20% and 35%. Definitely happy I went with 20%!
Do you have air gauges to read out how much pressure you are riding on? If so how much psi do you drive around in? Also how many switches do you have?
I have 2 analog dial gauges that came with the Air Runner kit. Each gauge has 2 needles. So for example, one gauge has 2 needles for the front driver bag and front passenger bag, while the other gauge also has 2 needles for the rear driver bag and rear passenger bag. I also have 4 manual switches going to each bag so each corner is controlled independently.
I've been riding on different pressures since I got the kit. It really depends on how I feel at that moment. Sometimes I feel like riding low so I'll set it at about 40 psi all around. For a dropped but not slammed look, I'll set it about 50 psi in the fronts and 45 psi in rears. When I don't care and just wanna cruise and not worry about dips, scraping, potholes, imperfect roads, etc. I'll ride around 60 psi in fronts and 50 psi in the rears.
Ride Low: ~ 40 psi all around
Conservative/Dropped: ~ 50 psi fronts, ~ 45 psi rears
Don't Care Mode: ~60 psi fronts, ~ 50 psi rears
Your fit has to be one of the cleanest i've come across. Im having the same air ride kit installed into my fit in a couple months and was wondering how did you get the rears to sit Lower? Was it an easy fix?
All rights reserved. FitFreak is a registered trademark of KART Media, LLC. FitFreak is not sponsored, endorsed, affiliated or authorized by American Honda Motor Co. Ltd., it's parent or subsidiaries. American Honda Motor Co. Ltd. trademarks are used solely for descriptive purposes and KART Media, LLC. assumes no ownership nor right of commercial use.
Legal Disclaimer: FitFreak.net contains information that is created and maintained by its
members. The site contains the personal opinions and other expressions of
the members who post the entries and does not reflect the views of
FitFreak.net or its employees. FitFreak.net does not control, monitor
or guarantee the information contained in this site or information
contained in links to other external web sites, and does not endorse any
views expressed or products or services offered therein. In no event shall
FitFreak.net be responsible or liable, directly or indirectly, for any
damage or loss caused or alleged to be caused by or in connection with the
use of or reliance on any such content, goods, or services available on or
through this site.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Fitfreak.net content, comments, or advertising. Fitfreak.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Fitfreak.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.