[nickroz]

I went the OEM/cat6 route. Works great. I didn't have a trim pry bar, so I used some cheap plastic palette knives, which are really thin and flexible. Here are some install pics. I wanted to post the locations of the headunit clips, bc they aren't fully explained in the MusicLink install.

Wrestled with this stupid A/C bottom cover clip for 45 mins.


Tape job.


Here's my problem. The lower portion of the headunit won't snap in tight. The clips are there, but it's just not pulling it in all the way. It's not getting caught on the cat6 cable and I'm not missing any screws/clips. I'm going to play with the torque on the (2) screws that go up on either side of the A/C controls. Maybe being too tight is causing it to bow.


It's not too apparent in the pictures, but when I try to snap on the bottom A/C coverplate, there's a 1/8 gap on the front.