ImportFest 2007 11/17/07 FIT K20A
#21
Thanks on the congrats!!!
But as for your comment, I spent Enough Time and money just to barely have the car ready for the show(driveable), so here's where I was at, just finished the engine two days before the show. (Performance before bling)
I have purpose / performance toys!
Suspension parts:
Skunk2 Springs
Honda Camber bolts (Thinner bolts to allow for zeroing out the camber)
Progress Auto Rear Sway Bar,
GTSpec Front Strut tower Bar.
HFP 16" rims
Engine Parts:
K20A2 Engine And Transmission (Rsx Type S U.S.)
Unorthodox Racing Light weight flywheel
Unorthodox racing Stage 1 Clutch.
Hondata Kpro programmable ECU
If anyone was to attemp this list trust me, it's up there in the realm of the cost of the car!
Personally I'm performance before "Show" I happen to win in the Show as a Honda Fit "showing" what it "can" be like if speed, clean/sleeper looks, and fit and finish is your taste.
Will I be able to enter next year same as, or with more performance aspects and expect to win again, I doubt it.
So, if it's the newness of the Swap, the uniqueness of being one of the first on the North East, or just lucky, I'll take it! K20A FTW!!!
But as for your comment, I spent Enough Time and money just to barely have the car ready for the show(driveable), so here's where I was at, just finished the engine two days before the show. (Performance before bling)
I have purpose / performance toys!
Suspension parts:
Skunk2 Springs
Honda Camber bolts (Thinner bolts to allow for zeroing out the camber)
Progress Auto Rear Sway Bar,
GTSpec Front Strut tower Bar.
HFP 16" rims
Engine Parts:
K20A2 Engine And Transmission (Rsx Type S U.S.)
Unorthodox Racing Light weight flywheel
Unorthodox racing Stage 1 Clutch.
Hondata Kpro programmable ECU
If anyone was to attemp this list trust me, it's up there in the realm of the cost of the car!
Personally I'm performance before "Show" I happen to win in the Show as a Honda Fit "showing" what it "can" be like if speed, clean/sleeper looks, and fit and finish is your taste.
Will I be able to enter next year same as, or with more performance aspects and expect to win again, I doubt it.
So, if it's the newness of the Swap, the uniqueness of being one of the first on the North East, or just lucky, I'll take it! K20A FTW!!!
Last edited by gettinafit; 11-21-2007 at 05:36 PM.
#23
Still waiting for Progress Auto to release their coil over kit developed on the K20 Fit......
Among none other than the HASPORT SWAP HEADER! Still waiting for that.....
Then a Tune or different KPro calabration, and I will be at the "complete" but stock stage.
Overall handling with Throttle in a turn has it's understeer, but other than that, it's agility is still the same! Very nimble, just quicker!
Among none other than the HASPORT SWAP HEADER! Still waiting for that.....
Then a Tune or different KPro calabration, and I will be at the "complete" but stock stage.
Overall handling with Throttle in a turn has it's understeer, but other than that, it's agility is still the same! Very nimble, just quicker!
#28
Hey Thanks! Your kit was the talk of the town! And as you can see your kits are everywhere! Couldn't have done it with out Hasport!
Even though the car is not 100% yet, you asked for a Teaser video Clip, here it is!
The clutch is just broken in nice, and I'm still affraid to dump the clutch or shift hard, AND it's still on the SHITTY Restrictive Welded Header, so it's a teaser vid! Enjoy!
YouTube - K20 Stock / Honda Fit / SRI
Even though the car is not 100% yet, you asked for a Teaser video Clip, here it is!
The clutch is just broken in nice, and I'm still affraid to dump the clutch or shift hard, AND it's still on the SHITTY Restrictive Welded Header, so it's a teaser vid! Enjoy!
YouTube - K20 Stock / Honda Fit / SRI
#29
Hey Thanks! Your kit was the talk of the town! And as you can see your kits are everywhere! Couldn't have done it with out Hasport!
Even though the car is not 100% yet, you asked for a Teaser video Clip, here it is!
The clutch is just broken in nice, and I'm still affraid to dump the clutch or shift hard, AND it's still on the SHITTY Restrictive Welded Header, so it's a teaser vid! Enjoy!
YouTube - K20 Stock / Honda Fit / SRI
Even though the car is not 100% yet, you asked for a Teaser video Clip, here it is!
The clutch is just broken in nice, and I'm still affraid to dump the clutch or shift hard, AND it's still on the SHITTY Restrictive Welded Header, so it's a teaser vid! Enjoy!
YouTube - K20 Stock / Honda Fit / SRI
#31
Well I am an Automotive Technician by trade! Thanks for the compliment! Soon I will have my own Shop in NY. Comming in Spring.... Stay tuned!
#32
oh boy dude... congrats is it going to be like a speed and tuning shop or more like everyday car normal basic oil change stuff...
#34
Click this link to find the answer to your question!:
https://www.fitfreak.net/forums/fit-...tml#post201579
.
.
.
https://www.fitfreak.net/forums/fit-...tml#post201579
.
.
.
#36
ImportFest 2007 Toronto. 11/17/07
IMPORTFEST 2007 Canada's Biggest and Baddest Car show!
I entered my K20A2 Powered Honda Fit into the Show and took home 1st Place for "Baddest Honda Other Class"
And here are my pics and some pics from the show!
K20A2 FTW!! 1st Place "Baddest Honda Other Class"
Now Pics of Other Cars from the Show!
EG Civic Coupe with (2003 3.2CL type S Engine and 6speed manual transmission!!!! 260hp 242tq)
IMPORTFEST 2007 Canada's Biggest and Baddest Car show!
I entered my K20A2 Powered Honda Fit into the Show and took home 1st Place for "Baddest Honda Other Class"
And here are my pics and some pics from the show!
K20A2 FTW!! 1st Place "Baddest Honda Other Class"
Now Pics of Other Cars from the Show!
EG Civic Coupe with (2003 3.2CL type S Engine and 6speed manual transmission!!!! 260hp 242tq)
Thread
Thread Starter
Forum
Replies
Last Post