Fit Engine Modifications, Motor Swaps, ECU TuningReference Library for Engine Modifications, Swaps and Tuning
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Chamber increases Air Flow speed to the motor. Increases more horsepower and quicker response.
besides the fact that they need to reword their description ("increases more horspower" LOL) any one here had experience or can explain how this "poer chamber" operates? visually, it has the looks but would be kinda expencive engine dressup item...
__________________
'07 Sport. White. unfortunatley AT
This intake looks nice, but if the photo is of the actual kit, the filter will be positioned directly behind the radiator, drawing hot air. Price is very competitive with other short ram systems, but I think the best location for the filter is as close to the cold air port in the driver's fender as possible. I clicked on the Badass link, and clicked on the link for the Fit model- found exactly the same photo as for the S2000.
Last edited by manxman; 01-30-2007 at 02:04 PM.
Reason: add comment
Here's a shot from Minkara. Reviews are generally positive and the owners seem to like it. I have heard from a friend that it actually showed some power loss on one vehicle they saw, but that was a while back and may have been an earlier version, or on the 1.3L DSi not the 1.5L, he didn't specify. The one review I skimmed through said that compared to the stock airbox, this made the engine rev more freely and smoothly in the mid-high end once the VTEC kicked in, and made it easier to maintain speed comfortably than with the stock airbox. He also said that it's got a hell of an intake growl, which was fun in it's own right. This was on a 1.5L JDM S model.
__________________
'07 Vivid Blue Pearl Sport w/stuff attached in useful places
Yeah, personally I think just a standard SRI like Fujita, etc. would be a better purchase than this. Aside from the sharp angles, the chamber on it isn't even remotely as large as a Power Box or T1R, so I can't see it being as effective as either of those for throttle response, etc. Take that benefit away and you're left with something like a standard SRI, and there are much better designed SRI's you could purchase I would say.
__________________
'07 Vivid Blue Pearl Sport w/stuff attached in useful places
The way this intake was being made, inside of the chamber got too many sharp edges and that creates a lot of turbulance which will cause to lose power. If they can make it in rounder shape then it should perform better.
__________________
--------------------------------------------- A&J Racing International #155-1991 Savage Rd Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist
----------------------------------------------
True that, I've tried such intake before and gain a little while cost alot, I just changed my Apexi to Trust Airinx SRI and it pulls so much better then both intakes
__________________
- 04' Jazz
- Nardi Steering
- Nardi Shift Knob
- Tanabe NF Springs
- Tanabe Sustec Strut Bar
- Trust PE II Exhst system (bye bye Zero1000 )
- TRUST Airinx SRI
- Induction Funnel
- One Happy Driver
ToP FueL power chamber intake!
)
Linear Mode
