The Official Blog from GD to GE to GK to GTI to R?
#4281
I like the applique as well, just looks bad with how beat up hers is. There are a few other cosmetic issues, when we take it to a pro next summer, that'll be dealt with as well.
#4282
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
ahh i c.
yah, dd's get worn out pretty fast. my 09 looks pretty worn too... lots of rust undercarrige from negliect, some rust found in the rear quarter arch area near the bottom which i need to grind off and touch up. will check the top of the arches too when i swap to snows (soon )...
#4283
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
so far no more dtc on the 09... will give until end of this week before i decide to just swap clamps or clamps + thermostat.
im not worried about the price of the thermostat.. i just dont feel like swaping it out if there's nothing wrong with it. i dont like wasting money.
im not worried about the price of the thermostat.. i just dont feel like swaping it out if there's nothing wrong with it. i dont like wasting money.
#4284
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
f- this site... wrote up a decent length post accidentally hit something to backup a page (f-king pc) and i forwarded to this page again, the post is gone.
#4285
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
anyway, short version...
no dtc's on 09
will be doing the Griots one-step-sealant this weekend on my '12... roof and hood for this weekend. i injured my hand so will be a biotch to do the work.
no dtc's on 09
will be doing the Griots one-step-sealant this weekend on my '12... roof and hood for this weekend. i injured my hand so will be a biotch to do the work.
#4286
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
meh, pushing off the sealant to next weekend. hand injury needs rest.
same with the clamp swap. my pointing fingers' swollen like the size of my thumb.. lol
same with the clamp swap. my pointing fingers' swollen like the size of my thumb.. lol
#4287
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
drove the 09 AT today.. kept stepping on the brake pedal with my left foot before engine start.. lol and while in neutral pushing the shifter to the left (doesnt move) to verify.
#4288
Do you use the orange polishing pad with the one-step sealant? Looking to throw some on both the GD and my Fiesta, worried about using a standard wax pad.
#4289
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
yah, i do use the griots orange pad for one-step sealant on my random orbital.
the thing is a biotch to clean (one-step sealant from used pad) even if you used their micro-fiber/foam cleaner, so i just toss it after use.
the thing is a biotch to clean (one-step sealant from used pad) even if you used their micro-fiber/foam cleaner, so i just toss it after use.
#4290
Gotcha. I'm going to do it by hand, hopefully my youth will allow me to survive doing it to both cars
#4291
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
it's A LOT of work working the product into the paint, but if your panels are relatively clean (post-clay) it might go quickly. GL!!
#4292
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
the 09 threw a code again today per wife. will scan it later but i think it's the same thing..
im thinking about buying a '15 impreza hatch cvt for the wife to replace the 09. at least until 2015 they're building them in japan. start 16' i read that they're going to build it at their indiana plant.... and i know all to well through past experience with a legacy i bought new how bad their production cars are.
im thinking about buying a '15 impreza hatch cvt for the wife to replace the 09. at least until 2015 they're building them in japan. start 16' i read that they're going to build it at their indiana plant.... and i know all to well through past experience with a legacy i bought new how bad their production cars are.
#4293
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
yep, was same code on the 09. ordered new thermostat. will replace soon.
if ses continues to come back im going to trade it in and get an impreza hatch to replace.
if ses continues to come back im going to trade it in and get an impreza hatch to replace.
#4295
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
yah, my focus is getting something reliable while awd so i am hoping the impreza hatch made in japan will deliver that. i read somewhere they're moving production to indiana in 2016.. and no thanks to indiana built subaru's. ive had plenty of warranty problems on my legacy in the past. it was stupid unreliable.
so far the read has not given me the confidence on the new honda fits, so im kinda...
so far the read has not given me the confidence on the new honda fits, so im kinda...
#4297
Subarus build quality isn't as good as it used to be overall. and the newer direct injected cars have a lot of issues with carbon fouling and injector failures. I know a couple of local foresters that are on motor number 2 and 3 respectively due to injector failure causing a meltdown from the super lean condition.
#4298
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
replaced the thermostat yesterday... no dtc after 2 drives. wont know for sure if that cures the low coolant temp problem or not until a couple more drives. car has fresh coolant again. and new clamps. now i wont have to worry about that lower clamp from breaking apart.
when i squeezed the lower clamp, fragments of rust flew everywhere... but it did not break while i snaked it off from the thermostat side.
when i squeezed the lower clamp, fragments of rust flew everywhere... but it did not break while i snaked it off from the thermostat side.
#4299
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
so far so good... no dtc on the 09. will know more by weekend, i think... hope it's over and done with. i need to work on sealing the roof and hood on my '12 this weekend.
#4300
BTW, I am now a fellow member of the two Fit club. I even have a 2012 Sport 5MT as well.