1st Generation (GD 01-08) The one that started it all! Generation specific talk and questions here!

Turning signals

Thread Tools
 
Search this Thread
 
  #1  
Old 06-06-2010, 11:22 PM
Cachupin's Avatar
New Member
Thread Starter
Join Date: May 2010
Location: Miami, Fl
Posts: 18
Turning signals

How do you make the turn signals blink faster?
 
  #2  
Old 06-06-2010, 11:25 PM
JJIN's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: Nov 2009
Location: Tustin, CA
Posts: 627
just throw some uncle bens at it. itll blink faster.
 
  #3  
Old 06-07-2010, 10:33 AM
ztyhurst's Avatar
Member
Join Date: Jun 2008
Location: Virginia
Posts: 69
I think it will blink faster if you replace a regular bulb with an LED bulb. Basically it will think you have a missing/dead bulb.
 
  #4  
Old 06-18-2010, 09:15 PM
Cachupin's Avatar
New Member
Thread Starter
Join Date: May 2010
Location: Miami, Fl
Posts: 18
I replaced the bulbs with LEDs and they blink faster even when i have the hazards on.
 
  #5  
Old 07-05-2010, 09:33 PM
wgolfguy's Avatar
Member
5 Year Member
Join Date: Apr 2008
Location: Pa
Posts: 24
Where did you get the led bulbs?
 
  #6  
Old 07-05-2010, 09:43 PM
Cachupin's Avatar
New Member
Thread Starter
Join Date: May 2010
Location: Miami, Fl
Posts: 18
I got the type of bulb number off of google, just type in your car and put bulbs diagram or something similar until you find what you need. then go on ebay, thats your best bet cause they cost about $30 a pair if you get them in the store at discount or something one of those places. then just type it in on ebay and just figure out what color you want. to replace every bulb in my car i spent roughly $40
 
  #7  
Old 07-05-2010, 09:50 PM
wgolfguy's Avatar
Member
5 Year Member
Join Date: Apr 2008
Location: Pa
Posts: 24
Cheers, thanks for the fast reply and the info!
 
  #8  
Old 07-05-2010, 09:57 PM
Btrthnezr3's Avatar
Member
5 Year Member
iTrader: (11)
Join Date: May 2009
Location: Texas
Posts: 3,266
Just an FYI...the reason that LED bulbs make your car "blink faster" is because there is less resistance in the bulb. You may end up with some electrical problems after a while unless you put in a resistor.
 
  #9  
Old 07-05-2010, 10:10 PM
seeremlive's Avatar
Member
Join Date: Apr 2008
Location: Parma Heights, OH, USA
Posts: 253
I second the "problems may occur" comment of Btrtnezr3 above. LED bulbs with out proper resistance is quite often the cause of cruise control not working or the AT brake/shift interlock not working or MT can sometimes allow you you to start the car without the clutch depressed.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
THE_DON
Fit Interior & Exterior Illumination
109
08-08-2023 05:03 PM
FlipsFit
2nd Generation (GE 08-13)
3
04-10-2014 04:51 PM
be12nard
2nd Generation (GE 08-13)
3
10-08-2010 01:24 PM
713_fit
2nd Generation (GE 08-13)
17
10-18-2009 01:06 AM
Deivioncrx
Fit Interior & Exterior Illumination
5
01-08-2007 03:48 PM



Quick Reply: Turning signals



All times are GMT -4. The time now is 03:55 AM.