GD1 Scrub radius
#1
GD1 Scrub radius
Hello everyone.
I've been trying to find this every where. It would be very helpful when selecting wheel offsets to keep it away from the dreaded 0.
Any one got this value. I have asked Honda JPN but as if they are going to help me choose non Honda parts.
A diagram of the front suspension with SAI and hub face offset at center line is all I'd need to calculate it.
Many thanks
Jason
I've been trying to find this every where. It would be very helpful when selecting wheel offsets to keep it away from the dreaded 0.
Any one got this value. I have asked Honda JPN but as if they are going to help me choose non Honda parts.
A diagram of the front suspension with SAI and hub face offset at center line is all I'd need to calculate it.
Many thanks
Jason
#2
Ok so I ask Honda via email and then by phone. They said they would not release the information as it is not in their interest to promote modifying their vehicles!
Any one got any contacts in a Honda racing development / promotion department that could be more helpful?
Any one got any contacts in a Honda racing development / promotion department that could be more helpful?
#4
Yes but scrub radius is not included.
It is not included in alignment printouts either.
Any alignment guys here know if you can set up a machine to calculate and output this figure. I imagine an alignment machine would be well placed to be able to figure this out...
It is not included in alignment printouts either.
Any alignment guys here know if you can set up a machine to calculate and output this figure. I imagine an alignment machine would be well placed to be able to figure this out...
Thread
Thread Starter
Forum
Replies
Last Post
coupdetat
Fit Suspension & Brake Modifications
16
02-09-2008 12:14 PM