Ok so awhile back I managed to make a license plate relocator for my 2010 fit sport for under $15 (maybe even less than that, gotta check the reciepts). So I plan on taking it all off and re-installing it for you all to see how I did this. It is extremely easy and you can run it offset on the left or right. So stay posted for my write up with pictures. I will try to do it today if it isnt to hot, and if I get my car back from the dealer today. (Some idiot stole my factory wheels)

 

$8.00 license plate bracket at autozone. i used this on my GD and user dela has it on his GE sprayed in satin black.
Bell/Adjustable license plate mounting bracket | License Plate Mounting Hardware | AutoZone.com

or follow jame's (sd_mr_fit) home depot relocator DIY. two L brackets, 4 bolts, 4 nuts, $3.00.. super cheap, super easy.

i don't mean to thread jack. just giving more frugal relocator options for people still modding on a hobo's budget

 

Turns out it is a lot cheaper. I used a 12" mending brace, 3 rubber washers, and a screw and nut. O and a plug for the hole the dealer put in my bumper.

 

Mine was free. I left it where it alone other than a cover.