Unofficial Honda FIT Forums

Unofficial Honda FIT Forums (https://www.fitfreak.net/forums/)
-   2nd Gen GE8 Specific Fit Interior Modifications Sub-Forum (https://www.fitfreak.net/forums/2nd-gen-ge8-specific-fit-interior-modifications-sub-forum/)
-   -   Silicone pad/mat for doors and cups holders (GE-8) (https://www.fitfreak.net/forums/2nd-gen-ge8-specific-fit-interior-modifications-sub-forum/81542-silicone-pad-mat-doors-cups-holders-ge-8-a.html)

luismycorreo 03-03-2014 07:16 PM

Silicone pad/mat non slip for doors and cups holders (GE-8)
 
Hello Guys

I just received this item I ordered on Aliexpress.com

high quality Gate slot pad rubber car cup mat/pad non slip mat 14pcs For Honda Fit/Jazz 2nd Generation 2008 2009 2010 2011 2012 -in Mounts & Holder from Automobiles & Motorcycles on Aliexpress.com

The seller has more colors available, is a very nice item

Best regards,
Luis
Honda Fit Sport GE8 - Cnd Mkt

Disclaimer: I'm not responsible for any bad experience buying this item.... just in case!

http://s9.postimg.org/tfaaygapb/DSC00994.jpg

http://s15.postimg.org/ugza8rnqz/DSC00993.jpg

http://s9.postimg.org/fsa8q1im7/DSC00996.jpg

more pictures here ...

https://www.fitfreak.net/forums/fit-...tit-bijou.html

AZ_HondaFamily 03-03-2014 10:51 PM

Thanks for posting! They do look nice and not too expensive

Rampo 03-04-2014 07:22 AM

Luis, any chance of posting pictures of the parts installed in your Fit? The parts look interesting, but I can't figure out where all the pieces go. I can guess on the two small rectangular pieces going into the console coin holders, and a couple going into the cup holders, but those long pieces on each side????

mike92615 03-04-2014 08:25 AM

I would think the long pieces go in the trays in the front doors.

fawbusha 03-04-2014 10:20 AM

Cool man I'd love to see pictures when you get a chance

neil patrick harris 03-04-2014 10:57 AM

I was thinking about just cutting up some cheap mouse pads to fit but that set is very complete and doesn't cost much.

OP, where are you located and how long did it take to get shipped to you?

luismycorreo 03-17-2014 08:48 PM

Hello guys

My car is very dirty, the Spring is comming the snow is melting so is very dirty now, but this link is for the same seller with pictures of the interior

Car Door Mat Cup Tank Pad non slip anti slip dash Gate Slot mat 14pcs For Honda Fit II/Jazz 2008 2009 2010 2011 2012 -in Mounts & Holder from Automobiles & Motorcycles on Aliexpress.com

Disclaimer: I'm not responsible for any bad experience buying this item....just in case!

dfvfit10 03-23-2014 12:24 PM

It looks cool and neat.

raytseng 04-17-2014 10:41 PM

i just received this after buying it on a whim.

The product is fine, but some puzzling questions on the choice of which mats they've provided. They went through the trouble to put mats for the door handle and door cup holders , both front and back, which are pretty useless,

YET, it does NOT include pads for the center cupholders or center front console, where you'd actually stash like your cellphone or other slippery devices.

Why they would neglect pads for those slots is completely bewildering to me.
Any ideas from anyone?

SieGunso 04-17-2014 11:41 PM

could be because different regions use a different style center console. euro/jdm have detachable type cup holders with coin slot.

luismycorreo 06-08-2014 03:25 AM

Hello guys

I posted some pictures here

https://www.fitfreak.net/forums/fit-...tit-bijou.html

Luis

megashaun 06-08-2014 05:16 PM

I think it's a little much to have the word "FIT" in the car so many times but this does seem like a practical product. What is the underside like? Might it be possible to just use these pieces upside-down but on the opposite side of the vehicle (as would be necessitated by the fact that the non-symmetrical pieces would be backwards)?

raytseng 06-08-2014 09:02 PM


Originally Posted by megashaun (Post 1241659)
I think it's a little much to have the word "FIT" in the car so many times but this does seem like a practical product. What is the underside like? Might it be possible to just use these pieces upside-down but on the opposite side of the vehicle (as would be necessitated by the fact that the non-symmetrical pieces would be backwards)?

You can, but defeats the purpose of using any product at all. You could just not use anything, or cut something out of material you find at home depot if you just want something in the slots.

The backside is smooth black silicon. Imagine a surface like release paper but squishy like gel(the paper backing of stickers)

megashaun 06-08-2014 09:48 PM


Originally Posted by raytseng (Post 1241695)
You can, but defeats the purpose of using any product at all. You could just not use anything, or cut something out of material you find at home depot if you just want something in the slots.

The backside is smooth black silicon. Imagine a surface like release paper but squishy like gel(the paper backing of stickers)

Ah, thanks! Yeah I've been keeping those slots clean with regular, um, cleaning.

Speaking of these little storage spaces, what do you guys use the thin slots for on either side of the handbrake? I find they're good for stowing my wallet and point and shoot camera.

sooznd 07-10-2014 06:05 PM

Seems like a cool item- I might not use all , but it seems worth it even for a few of them.

I noticed the two links provided have different versions of the "Fit" logo.

the first one has the 2nd Gen logo

high quality Gate slot pad rubber car cup mat/pad non slip mat 14pcs For Honda Fit/Jazz 2nd Generation 2008 2009 2010 2011 2012 -in Anti-Slip Mat from Automobiles & Motorcycles on Aliexpress.com

and the second link has the 1st Gen logo with the dot, but says it is for the second gen Fit.

Free shipping 19pcs Set Gate Slot Pad Car Door Non slip Anti slip Interior Mat For HONDA NEW FIT 2010 2013 2014-in Floor Mats from Automobiles & Motorcycles on Aliexpress.com

confused? or maybe it doesn't matter which one?

luismycorreo 07-10-2014 11:28 PM


Originally Posted by sooznd (Post 1248794)
Seems like a cool item- I might not use all , but it seems worth it even for a few of them.

I noticed the two links provided have different versions of the "Fit" logo.

the first one has the 2nd Gen logo

[URL="http:......com[/URL]

and the second link has the 1st Gen logo with the dot, but says it is for the second gen Fit.

[URL="http://.....[/URL]

confused? or maybe it doesn't matter which one?

Hello Susan

You're right, seems the seller has been update the item, before both links where the same 14 pieces ... now the 2nd one have the 1st gen logo and 19 pieces

Luis

sooznd 07-11-2014 12:10 AM


Originally Posted by luismycorreo (Post 1248881)
Hello Susan

You're right, seems the seller has been update the item, before both links where the same 14 pieces ... now the 2nd one have the 1st gen logo and 19 pieces

Luis

Luis
When I looked at more detail the cheaper set with the 1st Gen log ($14.98) says it is rubber. The $17.99 set is silicone. I ordered this one- was curious about the glowing- thought it might be cool at night

door gate slot pad/mat tank gasket cup luminous non slip pads 14pcs For Honda Fit/Jazz 2nd Generation 2008 2009 2010 2011 2012-in Mounts & Holder from Automobiles & Motorcycles on Aliexpress.com

luismycorreo 07-11-2014 12:16 AM


Originally Posted by sooznd (Post 1248897)
Luis
When I looked at more detail the cheaper set with the 1st Gen log ($14.98) says it is rubber. The $17.99 set is silicone. I ordered this one- was curious about the glowing- thought it might be cool at night

door gate slot pad/mat tank gasket cup luminous non slip pads 14pcs For Honda Fit/Jazz 2nd Generation 2008 2009 2010 2011 2012-in Mounts & Holder from Automobiles & Motorcycles on Aliexpress.com

Yeah, must be nice those pads glowing in the dark... please let us know your impressions and post some pictures

Luis

sooznd 08-21-2014 03:57 PM

Luis
I finally got my set of silicone pads-- took nearly a month to ship from China- don't know if that is normal or not. Seems like other items I have bought on ebay that were shipped form China took less time.

They are nice quality! They will save me from needing to clean the dust out of these spaces, too.

Since I have an armrest - there was an extra pad, so I used it on the right center front cupholder-even though the pad was squarish- it fit pretty well in the round cupholder. I have my GPS mount in the driver side front cupholder..

will post photos when I can

luismycorreo 08-21-2014 10:09 PM


Originally Posted by sooznd (Post 1257802)
Luis
I finally got my set of silicone pads-- took nearly a month to ship from China- don't know if that is normal or not. Seems like other items I have bought on eba..............S mount in the driver side front cupholder..

will post photos when I can

Waiting for your pictures....

Luis


All times are GMT -4. The time now is 01:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands