My J's Racing Carbon Fiber Steering Wheel plus Trim
 

Here are the DIY :)

Box and Unboxing:

Attachment 10760



Attachment 10761


Attachment 10762



Attachment 10763


Attachment 10764


Attachment 10765


Attachment 10766



Attachment 10767



Take out the Plastic Cover underneath the steering wheel:
Attachment 10768


Unplug two socket (Yellow and Black):
Attachment 10769


Attachment 10770



Using Torx T30, open the two bolt that hold the airbag.
There is opening on left and right side of steering wheel to access this bolt:
Attachment 10771


Take the SRS AirBag Unit out:
Attachment 10772



Disconnect the main wiring socket (blue):
Attachment 10773



Use Socket Wrench 14mm, remove the main bolt:
Attachment 10774




Attachment 10775


Pull out the steering wheel, shake it, wiggle it, pull it until it is off:
Attachment 10776


Attachment 10777


Take out the rear plastic panel and then start taking out all the screws
and remove all the plastic panel, wiring, switch etc to the J's Racing Steering Wheel:

Attachment 10778





Attachment 10779


Once all the parts moved to the J's Racing Steering wheel,
it will look like this:
Attachment 10780


Comparison between J's Racing Steering Wheel and OEM Stock:
Attachment 10781


Attachment 10782


Attachment 10783


Install the steering wheel back,
tighten the main bolt using torque wrench at 39nm (but I use 40nm) :)

Attachment 10784






Attachment 10785


Connect all the wiring, and the air bag, and tighten the two Torx T-30 bolt
to 10nm, oh, and Honda told to discard this bolt, but I reuse them
and apply Loctite:
Attachment 10786


And here is the Final Step,
Install the J's Racing Carbon Fiber Steering Wheel Trim,
and here it is :

Attachment 10787


Attachment 10788


Attachment 10789



Attachment 10790

Got mines in the other day. Just wanted to clarify on something:

When removing the rear plastic panel and transferring the guts, are they just held in by the screws?

Any any link to the CF trim? Thanks for the write up!

Hi, Congratulations :)

Yes, the rear plastic panel and other stuff just hold by some screws,
easy :)

The Carbon Fiber Trims are from eBay,
and below is the link:

http://www.ebay.com/itm/Authentic-Js-Racing-Carbon-Steering-Wheel-Trim-Fit-CIVIC-SI-FA1-FA5-FG2-FG1-GE8-/151520515847?hash=item2347539707&vxp=mtr

Very nice wheel!

Thanks BMW!

Awesome!!

Dread to think how much that set you back

Here is the link to J's Racing store at Rakuten:

jsracing | Rakuten Global Market: Sports steering-carbon black / yellow stitch

It is not that expensive, $ 376.62 (¥ 45,360) plus shipping...

Thanks man!

I'm going to hate myself for clicking on that link :p

ok that is pretty sick!

is it wrong of me to want the identical wheel without the bling of the cf and yellow stitching,

oh man... this looks looks awesome. thanks for the pics.

Then would you consider this model, below is the website link :)

https://www.jsracing.co.jp/js2/index...-JSL&xKEYWORD=

It do not have the carbon fiber part, only leather,
but it still have red stitching with large logo of J's Racing