Fire Extinguisher Mount (2013 Sport)
Hey everyone. I've been addicted to modding my Fit recently, and I really wanted to add a fire extinguisher just to give it that rally-ish look. With the trunk area itself being taken up by so much plastic, I was really looking for a seat mount that would work, and I wanted to let you all know that The Bracketeer system does actually work on the stock seats.
Picture 1 is the Bracket itself. They recommend that you attach it to the seat rails mounted to the body of the car, but I found that with the dimensions, that just was not possible. Picture 2 is what it looks like with a 2.5 lb Kidde extinguisher. Picture 3 shows what the clamping system is, turns out the seat's internal rails were sufficient enough for the bracket to slide into and stay secure. NOTE: I am a fairly tall guy, so the seat is all the way back, I am not sure if this setup would work on someone that's a bit shorter, as the seats rails would not be accessible. https://cimg0.ibsrv.net/gimg/www.fit...f7e52015e4.jpg https://cimg2.ibsrv.net/gimg/www.fit...6abb7e86c3.jpg https://cimg3.ibsrv.net/gimg/www.fit...3ac6f2a446.jpg Links to everything if you want this same setup yourself: https://www.kidde.com/home-safety/en...or-home/fa110/ |
Cool look. But not really needed in these cars.
|
That's a nice clean mod, my friend. I hope you never need it!
|
Very cool. I've been considering one, just in case I see an accident or something.
|
All times are GMT -4. The time now is 02:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands