hummmm... they look alright, but i think the stock 16's look better especially when lowered and using some 15mm offset spacers.

 

You must have picked up that set from Jon?

What tires did you end up going with for them?

 

daymnn! I've been waiting to see if any GE owners would get HFP wheels. And they look exactly how i imagined it to look on a GE...GANGSTER! =]

 

I'm just gonna put my stock tires on for now and upgrade later. I'm gonna be saving up for some Yokohama ES100 or maybe something stickier!

 

As far as the part number for the Yokohamas --I purchased them at Discount Tire is YK520.[/quote]

Thanks for the info. I think I will order a set today.

 

Here it is with HFP wheels and a T1R drop:

 

i think those rims have the wrong offset for you.

 

I had those on my old car and I liked them a lot. They were a nice balance of being fairly fun to drive on but still being quite comfortable, quiet, and reasonably good in all kinds of weather (they never left me stuck in the winter here in Michigan).

I had about 20000 miles on them when I got rid of that car, and you could hardly see any wear on them at all. Before them I had a set of YK420s (basically the predecessor to the 520) and I got about 60000 miles out of them.

 

I was looking at the HFP rims yesterday! I was wondering what it would look like and oh man... DIGGIN' it! That's a bomb price for them to! Best I can get them for is 650 for all 4 without tires.

Looks sweet and it'll look even sweeter with the car lowered!

 

The wheels look great and the price is about right too. Can you use the tire pressure sensers in these wheels?

 

where the hell was this thread when i was looking to get my hfp's!! i search and found nothing lol

 

did u find your answer?

 

did you use the TPMS sensors?

 

Got this wheels installed two weeks ago. Men my MPG got better.

And oh yea, I transfered my tpms from stock wheels to HFP wheels. Works just fine.

 

I'm still using my stock tires with my HFP wheels. When their worn out, I'll probably getting continental pro contact 205/50/16.

 

sorry for bumping this old thread but i might be getting thses HFP wheels for my '12 model. Stockies are 16x6 +53 offset and these are 16x6.5 +55 offset

Now thing is im lowered on BC coils and not sure if i will have rubbing issues on the suspension side since it will be closer already. Any thoughts?

other infos:
- dropped around 1.5 finger gap front and 2 finger gap rear
- -1.2 camber front

*also have 5mm spacers for the rear currently and thinking if i will have isues without them, should i put some in front as well? and is it safe to just put on those slap on spacers?

lastly, i'll be using the stock tires of 185/55/16 at the moment and planning to run either 195/50 or 205/50 when it wears out... any issues you thinking of?

Thanks in advance!