3/22/14
Bought my 2011 Honda Fit Sport in TW w/ Nav and all the bells and whistles... clean title/carfax 30k miles and prestine!

Factory parts included were:
-OEM Center armrest (Honda SKU: 08U89-TK6-111)
-OEM Cargo cover (Honda SKU: 08U35-TK6-111)
-OEM All season floor mats (Honda SKU: 08P13-TK6-110)
-OEM Carpeted floor mats (Honda SKU: 08P15-TK6-110)
-OEM Rear bumper applique (Honda SKU: 08P48-TK6-101)

 

4/5/14
Arrived!
-OEM Door/window visors (Honda SKU: 08R04-TK6-101)
-OEM Cargo tray (Honda SKU: 08U45-TK6-100)

 

4/18/14

Arrived!
-OEM Rear splash guard (Honda SKU: 08P09-TK6-100R1)
-OEM TW Touch-up paint pen (NH-578)
-OEM Accord horn (Honda SKU: 38100-STK-A02)








Here's the size comparison


Here's a video of the difference

 

4/22/14

Arrived!
-Blox Racing short antenna (BXAC-00510)
-Ebay black i-VTEC SOHC stickers





Here's a side by side comparison










and Just to add my own very own touch...

 

Nice TW FIT bro. Welcome to the TW family. I'd like to swap my horn too but with a Prelude sound vs. Domestic sound of my 08 Accord.

 

5/1/14

Arrived!
-Work Eurolines 16x7et+35 dual lug pattern 4x100/5x100 super clean!

Been looking at a lot of wheel options, and decided on these! I thought they were unique(at least I haven't seen anyone with this setup yet), and I've always been a fan of these wheels. Can't really go wrong with Works either.

 

5/8/14

Finally had a chance to have my current Bridgestone Turenza's mounted and balanced on the Eurolines. Tire is factory spec 185/55r16. Fitment is decently aggressive; the rears fit better than flush, and the fronts poke out a tad. I knew the safe offset was around +41 to +45, but I'm planning on cambering out to make up for it. Before you judge me let me just say: I WILL BE ORDERING COILOVERS SOON AND LOWERING IT A TON...

 

More (High Quality) pictures of my current fitment coming soon... when the weather gets nicer, and I get a chance to give it a good wash!

 

Damn, that's a clean set! Going to look great with coilovers.

 

Does the splash guard fit perfectly? I put that part number in and it says it's not for the sport.

 

Thanks! You should make a video of the difference too haha.

 

Thanks man! I've been itching to order a set; just can't decide on one yet, and funds need to work in my favor.

 

They fit like a glove! If you have a sport model, you can only have the rear ones in place. The fronts won't work because of the factory sideskirt that comes with your sport model. Reason why the rears work is because it mounts on your rear bumper. Idk where you searched, but that part number should only be for the rears.

 

Looking great so far. Howd you get the short antenna to fit? The threads don't fit? I'm stuck with that.

 

Great progress!

Blox comes with a universal threading, you just attach the threading to the bottom of the antenna and attach the antenna to the base.

 

Thanks. Ill try that out

 

When you screw your factory antenna off the thread stays with the antenna, but if you take an alan wrench to the bottom of the Blox antenna base you can pull out the thread enough to screw into the factory placement.

 

Fresh! Can't wait to see it cambered and lowered!

 

Thanks bro! I appreciate it.

 

Looks good. What size are the foglights? You got the yellow foglight film and I was going to order some if the leftover I have from my EK doesn't fit. I searched and couldn't find an answer on foglight size.