|
rims
will these rims 16x9 fit on my 2010 honda fit or will they rub? And if so what is the widest rim size a fit wheel well can handle?
http://www.ebay.com/itm/ROTA-WHEEL-GRID-V-16X9-4X100-0-FRSB-MIATA-ACURA-CIVIC-INTEGRA-VW-MR2-/291547527734?hash=item43e1963a36&vxp=mtr |
Offset = 0
These will not fit, at least not without very substantial fender surgery, possibly even a fenderectomy. |
Originally Posted by DrewE
(Post 1318167)
Offset = 0
These will not fit, at least not without very substantial fender surgery, possibly even a fenderectomy. |
2 Attachment(s)
Originally Posted by GE8FTW
(Post 1318169)
Ok thanks might just do 16x7 or 7 1/2
7 is plenty but you need to be concerned with offset. Has to be 40 at least. I am on 16 x 7 with 40 offset lowered on Swifts and I run occasionally. Attachment 10701 Attachment 10702 |
1 Attachment(s)
17x7 +42 with 5mm spacer in the rear. Rear rolled and pinched front is also rolled and running -2 camber. 195/45/17 tire no rub other than liner on big bumps.
https://www.fitfreak.net/forums/atta...ine=1440647277 |
mine are 16x7 ET40 with 5mm spacer on the rear, running 205/50/16 DWS.
front has -1.5 neg camber using camber bolts, lowered on swifts. absolutely no rubbing at full bump. |
Originally Posted by kenchan
(Post 1318418)
mine are 16x7 ET40 with 5mm spacer on the rear, running 205/50/16 DWS.
front has -1.5 neg camber using camber bolts, lowered on swifts. absolutely no rubbing at full bump. Using original wheel studs on the rear with spacers? |
| All times are GMT -4. The time now is 09:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands