MM codes
 

Is there a way to see the upcoming MM codes before your MM reaches 15%? Currently at 20% and want to change the oil before a long trip this weekend but don't want to lose the code(s). I suppose if no other way I could change the oil without resetting MM and then at 15% observe the codes and reset it.

_

Go to the percentage screen, press and hold the knob for 8-10 seconds until it blinks. It will then show you the next service needed.
Then to reset it, while the minder is blinking press and hold the knob again until it turns to 100%.

Thanks. I saw that in the manual but wasn't sure if the codes appeared before 15% or not. I didn't try it because it wasn't clear if the blinking would eventually stop and revert to normal screen or if you had to reset MM to stop the blinking.

_

Press and release will get you out of the blinking screen.