Rims?
My choice for a black vehicle is bronze. I know some might say bronze has been played out, but to my eyes black cars look at their best with it. I've never been a big fan of white wheels on black, my friend purchased his EK9 CTR so many years ago and they only came with white wheels and it just never looked right to me. The ITR came with a gunmetal type color instead of white.
Go onto Tire Rack and you can match wheels up to the car, they might not have any wheels you want, but at least you can see some different colors on black.
Go onto Tire Rack and you can match wheels up to the car, they might not have any wheels you want, but at least you can see some different colors on black.
Thread Starter
|
Member
Joined: Jan 2010
Posts: 46
From: CA
dam, those hella stand out. i was thinking of these
http://www.tirerack.com/upgrade_gara...k+w/Red+Stripe
http://www.tirerack.com/upgrade_gara...k+w/Red+Stripe
Well seeing what you are looking at, how about these (SP10) compared to the MR116? They are in Hyper Black.
No weight listed for the MR116, but the SP10 is listed as 16.5lbs for the hyperblack and 17lbs for the black. Probably best to just average those for now, because I don't believe one paint finish would be less weight than the other.
Both sets are 17x7 +40, so if you want to lower, you are probably going to want to at least roll the fenders.
No weight listed for the MR116, but the SP10 is listed as 16.5lbs for the hyperblack and 17lbs for the black. Probably best to just average those for now, because I don't believe one paint finish would be less weight than the other.
Both sets are 17x7 +40, so if you want to lower, you are probably going to want to at least roll the fenders.
Last edited by 555sexydrive; May 3, 2010 at 11:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
