Noblesse PS HKS POWER
Noblesse PS HKS POWER
helloo
there is my ordinary fit taken from cellphone camera,,,,
enjoyed....
comment please...





- HKS Turbochager Kit GE
- HKS SSQV Black Limited
- HKS Racing Suction GE
- HKS Stainless Center Pipe GE
- HKS Silent Hi-Power GE
- Fuel System Upgrade
- Extra injector Upgrade
- Walbro High Flow Fuel Pump
- Pivot Mega Raizin
- Pivot Raizin Spark type S
- Pivot Raizin Earth
- Pivot 3-Drive
- Blitz Dual Turbo Timer & Boostmeter
- Dastek Q+ OCD5
- Turbo Module TM0281A
- Oil Catch Tank Cusco
- Advan RG2 Black Edition
- Black D1 Nuts
- Eibach Pro Kit
- Noobless PS with custom LED and Carbon look Grill
- Front window tint with 3M crystalline others with 3M blackbeauty
- Spoon sport short antena
- Daylight with super white led
- 100/90 W Rally halogen headlamp + Relay
- Fit RS Japanesse Tailgate Spoiler
- Door Visior EUDM
- Hella TwinTone Horn
- Carbon Hood
- JDM Tail Lamps
there is my ordinary fit taken from cellphone camera,,,,

enjoyed....
comment please...






- HKS Turbochager Kit GE
- HKS SSQV Black Limited
- HKS Racing Suction GE
- HKS Stainless Center Pipe GE
- HKS Silent Hi-Power GE
- Fuel System Upgrade
- Extra injector Upgrade
- Walbro High Flow Fuel Pump
- Pivot Mega Raizin
- Pivot Raizin Spark type S
- Pivot Raizin Earth
- Pivot 3-Drive
- Blitz Dual Turbo Timer & Boostmeter
- Dastek Q+ OCD5
- Turbo Module TM0281A
- Oil Catch Tank Cusco
- Advan RG2 Black Edition
- Black D1 Nuts
- Eibach Pro Kit
- Noobless PS with custom LED and Carbon look Grill
- Front window tint with 3M crystalline others with 3M blackbeauty
- Spoon sport short antena
- Daylight with super white led
- 100/90 W Rally halogen headlamp + Relay
- Fit RS Japanesse Tailgate Spoiler
- Door Visior EUDM
- Hella TwinTone Horn
- Carbon Hood
- JDM Tail Lamps
Last edited by ANGGGER; Oct 10, 2010 at 05:27 AM.
about 60 hp with boost at 0.4 bar.... just replace the oem bumper with this noblesse premium sport..and add carbon printing on the grill and amg custom led,,,
Last edited by ANGGGER; Oct 16, 2010 at 12:16 AM.
coz i just got mine boosted too with HKS kit. 
add roughly another 60horses on tap.
small modification needed on the bumper: a cutting on top part (near the radiator)so the intercoller pipe can be fitted. Fog lamp cannot be install, a bit of tight squeeze for the rest of the piping.. i guess it will be easier for USDM bumper as you guys have longer nose so bigger space
.btw front sub frame or crash frame also need to be cut to make space for the intecoller pipe.
gw kira itu inggris
let me answer this
coz i just got mine boosted too with HKS kit. 
add roughly another 60horses on tap.
small modification needed on the bumper: a cutting on top part (near the radiator)so the intercoller pipe can be fitted. Fog lamp cannot be install, a bit of tight squeeze for the rest of the piping.. i guess it will be easier for USDM bumper as you guys have longer nose so bigger space
.
btw front sub frame or crash frame also need to be cut to make space for the intecoller pipe.
coz i just got mine boosted too with HKS kit. 
add roughly another 60horses on tap.
small modification needed on the bumper: a cutting on top part (near the radiator)so the intercoller pipe can be fitted. Fog lamp cannot be install, a bit of tight squeeze for the rest of the piping.. i guess it will be easier for USDM bumper as you guys have longer nose so bigger space
.btw front sub frame or crash frame also need to be cut to make space for the intecoller pipe.


or should i said minor or prob "lots of" modification needed.
. NOT so bolt-on like what it's written on the brochure..
lots need to be remove just to install the turbo+manifold.
hhhmmmmm... some sweden people say it with small not minor (in dota forum)...hehe.. their english just as bad as mine...ahahhaa....




hehe... kgk ngerti mereka.