Java^FiT Photo/Progress Thread
I just got my ETC from Panson today, updates and such in my thread on the FI section..
I am gonna write a short review here after I finish a bit of HW.
Then a follow up in a few days.
I have the race version and spent most of the Day in SP7.
SP8 or 9 turn the throttle into a lightswitch and at say 15% throttle in normal mode where the engine might be turning around 2000rpm if you bump it up to SP9 it shoots to somewhere in the low-mid 4000rpm range!
So that makes anything but a tire spinning start a bit tough. But fun.
I like how much sharper it makes the throttle response. Between the ETC and being able to mess with VTEC settings when I get the FIC it should make for a ridiculously responsive turbo setup! For which almost all the parts have arrived..
I am gonna write a short review here after I finish a bit of HW.
Then a follow up in a few days.
I have the race version and spent most of the Day in SP7.
SP8 or 9 turn the throttle into a lightswitch and at say 15% throttle in normal mode where the engine might be turning around 2000rpm if you bump it up to SP9 it shoots to somewhere in the low-mid 4000rpm range!
So that makes anything but a tire spinning start a bit tough. But fun.
I like how much sharper it makes the throttle response. Between the ETC and being able to mess with VTEC settings when I get the FIC it should make for a ridiculously responsive turbo setup! For which almost all the parts have arrived..
I just got a little sad
Well don't be too sad, as 1st gear is almost unusable from a standstill in SP8 or 9 unless you plan on letting the clutch out @ ~4500 (max tq)
I edited that post to show that the ETC combined with better fuel, cold plugs, and light wheels/tires it should allow for more torque production in the parts of the power curve where the throttle would not normally be open as much.
An ETC will not make more peak power though, obviously. Once its WOT.. that's it unless you boost or spray it
I just got my ETC from Panson today, updates and such in my thread on the FI section..
I am gonna write a short review here after I finish a bit of HW.
Then a follow up in a few days.
I have the race version and spent most of the Day in SP7.
SP8 or 9 turn the throttle into a lightswitch and at say 15% throttle in normal mode where the engine might be turning around 2000rpm if you bump it up to SP9 it shoots to somewhere in the low-mid 4000rpm range!
So that makes anything but a tire spinning start a bit tough. But fun.
I like how much sharper it makes the throttle response. Between the ETC and being able to mess with VTEC settings when I get the FIC it should make for a ridiculously responsive turbo setup! For which almost all the parts have arrived..
The ETC lets me really take advantage of the few mods I have done so far (light wheels & tires, cold plugs and premium fuel)
The ETC lets us get to higher load at lower rpm, where the premium will really shine.
Only problem is I can't run my OBD2 logger while I have the ETC plugged in so I don't know what my timing/AFR's actually are till I have the FIC!
I am gonna write a short review here after I finish a bit of HW.
Then a follow up in a few days.
I have the race version and spent most of the Day in SP7.
SP8 or 9 turn the throttle into a lightswitch and at say 15% throttle in normal mode where the engine might be turning around 2000rpm if you bump it up to SP9 it shoots to somewhere in the low-mid 4000rpm range!
So that makes anything but a tire spinning start a bit tough. But fun.
I like how much sharper it makes the throttle response. Between the ETC and being able to mess with VTEC settings when I get the FIC it should make for a ridiculously responsive turbo setup! For which almost all the parts have arrived..
The ETC lets me really take advantage of the few mods I have done so far (light wheels & tires, cold plugs and premium fuel)
The ETC lets us get to higher load at lower rpm, where the premium will really shine.
Only problem is I can't run my OBD2 logger while I have the ETC plugged in so I don't know what my timing/AFR's actually are till I have the FIC!
That one looks pretty nice, do you recommend that over the scII? the one thing i liked about the scangauge was its compact size, im not sure where i would mount the ultra because i dont want it on yhe windshield.
Couldnt you just get an obdii y cable to connect both? that is what i was planning for my ETC/Scanguage or Ultra combo
Couldnt you just get an obdii y cable to connect both? that is what i was planning for my ETC/Scanguage or Ultra combo
So win-win!
The ultra gauge is a nice bit of hardware! I almost bought one over the winter! But there are other priorities.
Modding two cars at once makes everything take longer
Yes I could, but after talking to MNFit tonight it looks like I should be picking up his FIC next week, so the money that would go to the OB2 Y-cable will be going towards an MT Boomslang harness and I'll be able to pull more info through the FIC than the datalogger!
So win-win!
The ultra gauge is a nice bit of hardware! I almost bought one over the winter! But there are other priorities.
Modding two cars at once makes everything take longer
So win-win!
The ultra gauge is a nice bit of hardware! I almost bought one over the winter! But there are other priorities.
Modding two cars at once makes everything take longer
I really like where your build is going, and what did you end up doing about your exhaust after we talked in this thread:
https://www.fitfreak.net/forums/2nd-...lp-thanks.html
Or is that still in the works?
https://www.fitfreak.net/forums/2nd-...lp-thanks.html
Or is that still in the works?
I really like where your build is going, and what did you end up doing about your exhaust after we talked in this thread:
https://www.fitfreak.net/forums/2nd-...lp-thanks.html
Or is that still in the works?
https://www.fitfreak.net/forums/2nd-...lp-thanks.html
Or is that still in the works?
I am also considering saving money by not modding the engine and having a ton of fun with a possible second project:
A classic mini with either a dswap or a bswap and awd conversion
An AWD original mini peeling the rubber off it's 13" rims through a 4 wheel drift would be a sight to behold!
Especially accompanied by shriek of a boosted B18 bouncing off the anti-lag! ;D
Especially accompanied by shriek of a boosted B18 bouncing off the anti-lag! ;D
It is also possible to kswap the mini but im not even going there. b16 will be fine with me because no doubt i will find a way to turbo that sucker. lol
making it awd is a real job and itll come down to how badly i want that
You can see my appeal to this idea clearly! hahaha...It would be a pricey project and be finished no where in the near future but im starting to save for it. With that being said, I doubt i see an sc in the fit's future because the mini will definitely become more of my project/show/amazing car lol
It is also possible to kswap the mini but im not even going there. b16 will be fine with me because no doubt i will find a way to turbo that sucker. lol
making it awd is a real job and itll come down to how badly i want that
It is also possible to kswap the mini but im not even going there. b16 will be fine with me because no doubt i will find a way to turbo that sucker. lol
making it awd is a real job and itll come down to how badly i want that
Any route you take should be interesting! But I hear ya on having one real project car. You need something to get to work!
haha that's for sure! Definitely need something to get to work, after all its funding this "hobby" haha. although with these gas prices i might end up getting a motorcycle for work commute.
Installed my UG last night, i havent changed any gauges yet because i diddnt have time, but i thought id show you guys my placement
$60 bucks - plugged it in the port, and hid wires. Easiest damn thing ive installed yet hahaha.
Check it out here: UltraGauge Automotive Information Center and OBDII Scan Tool
Check it out here: UltraGauge Automotive Information Center and OBDII Scan Tool
Do it man! its totally worth it, even if you just use it once to clear a CEL!