2nd Generation GE8 Specific Fit Photos & Videos Sub-Forum Threads for displaying photos and videos of the 2nd generation GE8 Honda Fit

just another ge8....

Thread Tools
 
Search this Thread
 
Old Jul 24, 2012 | 09:31 PM
  #41  
thengst11's Avatar
Member
Joined: May 2011
Posts: 21
From: bremerton, WA USA
what offset are you wheels and how much are you lowered?
 
Old Jul 24, 2012 | 10:26 PM
  #42  
LittleFit's Avatar
Member
5 Year Member
Joined: Oct 2008
Posts: 368
From: SOcal, CA
almost looks like mine keep up the good work
 
Old Jul 25, 2012 | 02:05 PM
  #43  
GaN-MaN's Avatar
New Member
Joined: Jul 2012
Posts: 16
From: Perth, Western Australia
Looking good. Minimal mods but comes out real clean.
Nice work buddy.
 
Old Jul 25, 2012 | 02:09 PM
  #44  
y950129's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Jul 2010
Posts: 152
From: Vancouver, Canada
Originally Posted by thengst11
what offset are you wheels and how much are you lowered?
i don't remember the offsets but i'm lowered about 1.5~1.7inch rear and about 1.2 in the front.... road here in vancouver is like bitch so i need a bit more clearing room for front....

Originally Posted by LittleFit
almost looks like mine keep up the good work
i was thinking the same thing when i saw ur thread before... sweet ride!
 
Old Jul 25, 2012 | 02:21 PM
  #45  
MEATBABY's Avatar
Member
iTrader: (1)
Joined: May 2011
Posts: 1,327
From: Kansas
5 Year Member
ET should be stamped into the wheels. Take a gander next time you have one off! Lovin the car. Those wheels, wing, and lip are killer. Maybe you should paint the caps for the bolts on the wing black?? Even just plasti dip them...
 
Old Jul 25, 2012 | 02:36 PM
  #46  
y950129's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Jul 2010
Posts: 152
From: Vancouver, Canada
Originally Posted by MEATBABY
ET should be stamped into the wheels. Take a gander next time you have one off! Lovin the car. Those wheels, wing, and lip are killer. Maybe you should paint the caps for the bolts on the wing black?? Even just plasti dip them...
thx for the info.... i kinda like them white.... i'm a two-tone lover and it suits my style...
 
Old Jul 25, 2012 | 02:48 PM
  #47  
thengst11's Avatar
Member
Joined: May 2011
Posts: 21
From: bremerton, WA USA
Thank you. I would assume the offset is around 45. I'm trying to figure out what wheels n tires I want. I'm only lowered 1.2 front and 1.0 rear
 
Old Jul 26, 2012 | 12:06 PM
  #48  
y950129's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Jul 2010
Posts: 152
From: Vancouver, Canada
Originally Posted by thengst11
Thank you. I would assume the offset is around 45. I'm trying to figure out what wheels n tires I want. I'm only lowered 1.2 front and 1.0 rear
well... i'm liking my s-drives so far... i think they're one of the best in rain...
i'm going to lower the car more this weekend... i'll post some new pics after....
 
Old Jul 26, 2012 | 11:54 PM
  #49  
thengst11's Avatar
Member
Joined: May 2011
Posts: 21
From: bremerton, WA USA
Originally Posted by y950129
well... i'm liking my s-drives so far... i think they're one of the best in rain...
i'm going to lower the car more this weekend... i'll post some new pics after....
How is the ride with the tires? Pretty bumpy? Do you haul any kind of weight? Like 4-5 people? Do you rub then? Ant info is great thank you.
 
Old Jul 27, 2012 | 01:42 AM
  #50  
y950129's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Jul 2010
Posts: 152
From: Vancouver, Canada
Originally Posted by thengst11
How is the ride with the tires? Pretty bumpy? Do you haul any kind of weight? Like 4-5 people? Do you rub then? Ant info is great thank you.
like i said the ride is great on s-drives but only thing negative(?) that i noticed was the tire noise.... with stock rims you have tons of clearing room whether you go for springs or coils.... but with after mkt rims it all depends... I did rub a little on the rear after installing rims so i pulled the fenders and never rubbed the rear since but when i went on really bumpy roads i rubbed the fronts... to minimize rubbing i ordered 195 instead of 205.
i rarely have 3 to 5 ppl in my car but when i do.... i don't care about rubbing but my fit doesn't seem to accelerate!!!! i used to have 15mm hubcentric spacers on the rears when i had the stock rims and yes i had quite a rubbing back then....
 
Old Jul 27, 2012 | 10:11 AM
  #51  
thengst11's Avatar
Member
Joined: May 2011
Posts: 21
From: bremerton, WA USA
Originally Posted by y950129
like i said the ride is great on s-drives but only thing negative(?) that i noticed was the tire noise.... with stock rims you have tons of clearing room whether you go for springs or coils.... but with after mkt rims it all depends... I did rub a little on the rear after installing rims so i pulled the fenders and never rubbed the rear since but when i went on really bumpy roads i rubbed the fronts... to minimize rubbing i ordered 195 instead of 205.
i rarely have 3 to 5 ppl in my car but when i do.... i don't care about rubbing but my fit doesn't seem to accelerate!!!! i used to have 15mm hubcentric spacers on the rears when i had the stock rims and yes i had quite a rubbing back then....
Thank you! I always have some kind of weight in my car. So 16" may the way to go for me
 
Old Jan 20, 2013 | 11:02 PM
  #52  
y950129's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Jul 2010
Posts: 152
From: Vancouver, Canada
Update

Wow... been so long since I posted. here are some pics after installing the grill... enjoy!

 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
clumsychristian
2nd Generation GE8 Specific Fit Photos & Videos Sub-Forum
8
Jul 15, 2013 01:26 AM
Topher
2nd Generation (GE 08-13)
22
Mar 15, 2011 11:14 AM
tkpsupreme
2nd Generation GE8 Specific Fit Photos & Videos Sub-Forum
20
Dec 1, 2009 10:38 AM
hanzo
Fit Photos & Videos
7
Jan 25, 2009 03:38 AM
LaZyBoI
Fit Photos & Videos
7
Nov 25, 2008 10:31 AM




All times are GMT -4. The time now is 10:53 AM.