2nd Generation GE8 Specific Wheel & Tire Sub-Forum This sub-forum is for all wheel & tire threads pertaining to the second generation Honda Fit (GE8)

16's or 17's

Thread Tools
 
Search this Thread
 
Old Apr 14, 2014 | 10:15 PM
  #1  
Longlivetheking's Avatar
Thread Starter
|
Member
Joined: Jul 2013
Posts: 38
From: Des Moines ia
16's or 17's

Hey all, I have a 09 Sport, and looking to get new wheels I'm lowered on drop zone springs been on them for about a year, about a 2 inch drop in front and 1.85 in the rear. what do you think the most offset i could do and rim recommendations ? also i want spacers for the rear possible?
 
Old Apr 14, 2014 | 11:01 PM
  #2  
mike410b's Avatar
Member
iTrader: (12)
Joined: Feb 2010
Posts: 7,619
From: .
5 Year Member
There are many threads on this.

Why do you WANT spacers? Why not just buy wheels that......fit?
 
Old Apr 14, 2014 | 11:07 PM
  #3  
kochsteven4's Avatar
Member
Joined: Apr 2014
Posts: 51
From: Colton, CA
i am running 16x8 with +25 offset and it gives it an agressive stance without being to far out, with 195,45,16 for tires and ride is great no rubbing and no fender mod. if you want 17 be ready for some work but i would say stay with 16
 
Old Apr 15, 2014 | 12:16 AM
  #4  
Desmond Lamar MacRae's Avatar
Joined: Feb 2014
Posts: 1,036
From: Wilmington, NC, USA
I would not spend money on new rims if you stay the same size. 17x7 w/ offset not lower than +45 and you wont need to roll fenders. That said, you are lowered 2in vs. the sport 1.3f/1.0r drop so it may cause rubbing.
 
Old Apr 15, 2014 | 08:30 AM
  #5  
Longlivetheking's Avatar
Thread Starter
|
Member
Joined: Jul 2013
Posts: 38
From: Des Moines ia
Originally Posted by mike410b
There are many threads on this.

Why do you WANT spacers? Why not just buy wheels that......fit?
Yeah honestly i dont know why i put this in there. I feel stupid now



I know there are alot of threads about this, there are so many answers, i guess my big question is if i get 17's will they rub with the drop i just gave?
 
Old Apr 15, 2014 | 09:25 AM
  #6  
mike410b's Avatar
Member
iTrader: (12)
Joined: Feb 2010
Posts: 7,619
From: .
5 Year Member
That's entirely dependent on offset/width/tires/camber/etc.

There's no one catch all answer.
 
Old Apr 15, 2014 | 10:04 AM
  #7  
Longlivetheking's Avatar
Thread Starter
|
Member
Joined: Jul 2013
Posts: 38
From: Des Moines ia
ok 17x7.5 with a 40 offset ? 195/40/17
 
Old Apr 16, 2014 | 09:25 PM
  #8  
painterguy's Avatar
Senior Member
iTrader: (1)
Joined: Oct 2013
Posts: 335
From: So Cal.
That tire size and wheel offset should be fine for no rub issue.

Im on 17x7 +42 with 195/45/17 Yoko S Drives and a +5mm spacer in the rear on Tein S techs.

Going to a +10mm spacer in the rear and the +5mm to the front with some camber.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
orataro
3rd Generation (2015+)
4
Aug 16, 2016 08:27 AM
SHOELAC3D
Fit Wheels & Tires
2
Aug 27, 2014 02:57 PM
SikxChoi
Fit Wheels & Tires
3
Jan 13, 2010 02:51 AM
Fit2bFit
Fit Suspension & Brake Modifications
4
Mar 3, 2009 02:08 PM
Tiffany
Fit Wheels & Tires
16
Apr 16, 2008 04:46 PM




All times are GMT -4. The time now is 12:34 AM.