Just to make it easier to find, here is a link to all the Honda Fits at the 2014 Sema show and their listed modifications.

SEMA Honda Fits


Also, I've copy and pasted the info from that page below, just in case it goes down, changes, etc and can no longer be found. I tried to divide them up into sections to make it easier on the eyes. Sorry if I divided them up wrong. I'm personally interested in Kenny Vinces turbo setup since he appears to have kept the stock engine but added a turbo kit (said it runs fine but needs some tuning) and Bisimoto's pulse chamber cat delete section that is supposed to have gained 20whp on an N/A fit. <~~Especially the pulse chamber as I could use that NOW.


For the 2014 SEMA Show, Honda enlisted the services of six creative automotive entrepreneurs to explore the tuning potential of the all-new Honda Fit by creating their personal vision for the compact sensation. Their efforts were chronicled on Tumblr.com where fans could vote for their favorite builds. All of these exciting new Fits are on display in the Honda booth at the SEMA Show this week. Read below for details and to see which one took home the prize as Fan Favorite in the 2015 Fit Performance Project.

Also on display at the Honda booth are two specially prepared vehicles from Honda Performance Development (HPD), including a 2015 Fit B-Spec concept race car, and a very special CR-Z built by HPD to pace the IndyCar racing series.

Honda is also showcasing a Dallara IndyCar chassis—powered by Honda—just like the car driven by Ryan Hunter-Reay to victory at this year's Indianapolis 500 race.

Please note: All modification information listed was provided by the vehicle builders and has not been confirmed by American Honda Motor Co., Inc. The modifications to these vehicles may void the manufacturer's warranty, may not be legal for street driving in all 50 states and have not been specifically suggested, recommended or approved by American Honda Motor Co., Inc.



Bisimoto 2015 Honda Fit Turbo

Bisimoto Engineering is known worldwide for awe-inspiring street, show and race vehicles. With no fear of the unknown, Bisimoto is always on the cutting edge of automotive technology. The Bisimoto 2015 Honda Fit "T" was no exception with 16 new parts designed for the new L15B twin cam engine and chassis, with the very best in performance and reliability. This fully functional turbocharged "Fit for you" was built to the tune of 480 Horsepower (410.6whp).

Powertrain Modifications:

AEM Electronics
Infinity 6 ECU
Boost controller and Fuel Pressure Regulator
Arias Pistons
ARP Headstuds and Bolts
Bisimoto Springs and Titanium Retainers
Bisimoto-Web Level 2.4 Camshaft
Bisimoto 360 degree Oil Cap
Bisimoto Cat-Back Exhaust System
Burns Stainless Muffler and hardware
Deatschwerks 1000cc Injectors
Golden Eagle Sleeves & Intake
Bisimoto MLS Gasket
Bisimoto Intake Heat shielding gasket
AEM 320LPH E85 Fuel Pump
NGK Iridium Spark Plugs
PurOl "Elite Series" Synthetic Motor Oils
Portflow Custom Headwork
Kinsler Fuel Rail & filter
R&R Steel Rods
Racepak IQ3 Dash
Rogue Racing heavy duty race harness
Turbonetics TNX-20 Turbo
Wastegate
Blowoff Valve
Vibrant Vanjen Clamps and Stainless Steel Hardware
TurboHot Coatings
Action 2MS clutch
Chassis/Suspension Modifications:

Bisimoto 5 lug Conversion
BuddyClub 17x7.5" F91 Wheels & Lugnuts
BuddyClub 4 pot big brake kit
Bisimoto Brake mounts
Toyo R888 Tires
Progress Coilover suspension & Sway Bars
Exterior Modifications:

Denmatic Design Scheme
Honda Genuine Accessories
RS Wing
Rhythms Powdercoating
Spearco Intercooler
Driftmotion aluminum piping
Extreme Autoworx Paint
Interior Modifications:

Bisimoto Reservoir Socks
BuddyClub Short shifter
G&J Braided Plumbing
Buddy Club Racing Seat
Crow Seat Belt

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Bisimoto 2015 Honda Fit Spec Car

Bisimoto Engineering is known worldwide for awe-inspiring street, show and race vehicles. With no fear of the unknown, Bisimoto is always on the cutting edge of automotive technology. This "track ready Fit" is the perfect cost effective Spec-racer, with a unique high flow Bisimoto Exhaust Pulse Chamber, custom valved performance suspension and aerospace derived automotive lubricants. Power is 151 horsepower to the crank (129whp).

Powertrain Modifications:

Bisimoto Exhaust Pulse Chamber System
Bisimoto MLS Gasket
NGK Iridium Spark Plugs
PurOl "Elite Series" Synthetic Motor Oils
TurboHot Coatings
Action 1MS clutch
Chassis/Suspension Modifications:

BuddyClub 17x7.5" P1 Racing Wheels
Buddy Club Forged Racing Lugnuts
Toyo R888 Tires
BuddyClub Racing Coilover Suspension system
Exterior Modifications:

Denmatic Design Scheme
Extreme Autowerks Wrap
Honda Genuine Accessories
Rhythms Powdercoating
Interior Modifications:

Bisimoto Reservoir Socks
Buddy Club Short Shifter

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

HPD 2015 Honda Fit B-SPEC Concept Race Car

Built for SCCA club racing, World Challenge, and Canadian Touring Car B-SPEC rules, this Fit has been developed by HPD to be raced in 2015. Designed to be an entry-level category, the B-SPEC class features showroom stock racing cars utilizing stock engines and chassis, fitted with competition roll cages, racing seats and other safety equipment; and manufacturer-approved suspension components, tires and wheels.

Powertrain Modifications:

HPD air filter
HPD air-conditioning delete belt
HPD stainless steel cat-back exhaust
Chassis/Suspension Modifications:

HPD coil over kit with race springs
HPD coil over kit with race springs
HPD braided stainless brake line set
Front brake pads
TR Motorsports C1 wheels with BFG R1 racing tires
Exterior Modifications:

Wrap by One 11 Ink
Interior Modifications:

Sparco racing seat
Sparco racing steering wheel and quick release
Schroth driver restraint harness
6-point roll cage

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Kenny Vinces 2015 Honda Fit

Feeling the Fit had been neglected by tuners, Kenny Vinces' mission with his build was to showcase the 2015 Fit as a great platform for the tuner world. The 2015 Kenny Vinces Honda Fit was built with the up-and-coming builder in mind but at the same time caters to everyone by using parts that are affordable but also include the desired wow factor. Virtually every aspect of the Fit was modified yet the build still keeps the Honda's sleek lines inside and out.

Engine:

1.5L Honda L15B Earth Dream i-VTEC Engine
Fulltime Fabrication Custom Forward Facing/Front-Mount Turbo Kit
BorgWarner EFR6258 Turbocharger w/ Velocity Stack
Fulltime Fabrication Custom Intake Manifold, Side Dump Tube, Exhaust
Vibrant 2.5" Intake and 3" exhaust tubing
Tial 44mm MVR Wastegate and BOV
Fulltime Fabrication Custom Cooling and Mounts
Espos Power Coating
Ceramic Coated Exhaust, Dunk Tube, Exhaust Manifold, Downpipe
Custom Silver Valve Cover
Downstar Billet Oil Cap and Engine Dress Up Kit
Nitrous Express 4 Fogger Piranha direct port System and N-Tercooler Sprayer
2 -Nitrous Express 5lb Bottle
AMSOIL Z-Rod 20w/50 Synthetic Motor Oil
Exterior:

BASF R-M Diesel Smoke Paint and R-M DC5335 Glamour Clear
Kenny V. Front Lip Spoiler and Custom Side Skirts, and Carbon Fiber Elements Duckbill Wing
Custom Molded ABS Rear Diffuser
Willy Custom Fiberglass Pocket Flares
Custom Carbon Fiber Elements Fog Light Covers, OEM Truck Garnish, Front Grill, Hood Garnish
Custom Molded ABS Rear Diffuser
Areocatch Hood Latches
JDM Red Honda "H" Badges
Honda Genuine Accessories Window Visors
Interior:

TAKATA Racing Narrow Race Pro LE FIA 23lb. Racing Bucket with Slider (driver side)
TAKATA Racing WIDE Race Pro LE FIA 23lb. Racing Bucket with Sliders (passenger side)
Custom Red Leather Wrapped with Black Stitching: Front seats, Shift boot upholstery, Armrest, Door Panel inserts, JDM Lonza Passenger foot rest plate, and Rear Seat
TAKATA Racing Race 4 bolt camlock belts (driver side)
TAKATA Racing Drift 3 bolt street legal belt (passenger side)
Mugen Pedals
Downstar Shift Knob
4 Point Roll Cage built by Victor Peña with Dual 5lb NX Bottle Mounts
BASF R-M CZZ-300 Silver Painted Door Panels and Roll Cage
Custom Black Suede Headliner, Shade and Sun visors
Custom Black dyed A, B, C, and D Pillars
Honda Genuine Accessories Door Sills
Kenny V. Fiberglass door panels w/ Kicker 6 ¾" KS667 Components
Wheels/Tires:

17x9 XXR531 Custom Powder Coated Red (front)
205/40/17 Toyo Proxes R888 (front)
17x10 XXR531 Custom Power Coated Red (rear)
235/40/17 Toyo Proxes R888 (rear)
Braking:

WP Pro Brakes L6 Caliper 12.3" Sawblade Rotors (front)
Lighting:

Lightwerkz retrofitting OEM Headlights
The Retrofit Store D2S 3.0 Projectors, Apollo 1.0 Chrome Projector Shrouds, Morimoto D2S 6000k HID Bulbs, Morimoto D2S 35w HID Ballast, Morimoto H4 MotoControl Wiring Harness

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Kontrabrands A.M.L. (Active Metropolitan Lifestyle) 2015 Honda Fit


A Honda Fit for an active metropolitan lifestyle. Great for any occasion whether it's commuting, sporty driving, a night out on the town, or a relaxing weekend. The 18" SSR Professor SP1 wheels and custom R-M paint really make the exterior pop. TEIN coilovers and Falken tires help the Fit hug the road while the Greddy exhaust system frees up additional horsepower. The interior is sporty yet plush with Sparco R100 reclining seats and custom upholstery. Upgraded Clarion audio components bring music to life and retain all the functions of the factory 7" audio display. A Greddy Fixie bicycle attaches to a custom Design Craft Fabrication removable slide-out bicycle holder.

Powertrain Modifications:

Greddy 2.5" full cat-back stainless steel exhaust system
Chassis/Suspension Modifications:

TEIN Street Flex coilovers and EDFC Active Pro with GPS sensor
Wilwood Forged Dynalite front brake kit with 4-piston calipers and 12.2-inch drilled and slotted rotors
Exterior Modifications:

DTM Autobody complete color change and body work
R-M Paint – Moulin Rouge
Mugen front lip spoiler and side skirts for JDM Fit
SSR Professor SP1 wheels in S.B.C. (Super Black Coat)
Front: 18" x 7.5" +42 (NR Disk); Rear: 18" x 7.5" +43 (SL Disk)
SSR GT forged lug nuts in red
Falken FK453 tires—front and rear: 215/35-18
Mothers Car Care Products
Honda OEM rear mud guards
Interior Modifications:

Sparco R100 reclining front seats
Custom interior upholstery
Sparco REFLEX SHRT pedal set
Design Craft Fabrication custom bicycle mount
Greddy Fixie bicycle
Clarion audio components:
260W 6.5" coaxial 2-way front and rear door speakers
Micro size 4-channel full range amplifier
150W amplified subwoofer, low profile
Mugen shift knob

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~

MAD Industries 2015 Honda Fit


This aggressively designed Honda Fit is completely painted in BASF R-M Waterborn System jet black and custom charcoal with gold accents. The bold cockpit compliments the charcoal and gold exterior accents with Katzkin Tuscany leather seat covers with perforated raven inserts and charcoal contrast stitching in the seats and door panels. Eibach Pro Kit performance springs set the aggressive stance on 19-inch "rotiform" IND-t wheels with Pirelli P Zero performance tires. MAD Industries, ComposiMo and Honda Power Sports teamed to pump up the wow factor with a fully customized matching Honda Grom that neatly fits inside the Fit with room for gear.

Powertrain Modifications:
Unmodified

Chassis/Suspension Modifications:

Eibach Pro Kit performance springs drops the Fit 1.5" for extreme enthusiasts
MGP brake caliper covers in custom charcoal with MAD logo
Pirelli P Zero Nero tires; 225/35ZR19
rotiform: 19"x8" directional IND-t two-piece forged wheels
Exterior Modifications:

BASF Waterborn System - Jet black and custom charcoal with gold details
PIAA Plasma Yellow fog lamp H11 bulbs
Madico specialty window film in custom gold to tie in with exterior theme
LightWurkz custom matte black headlamp housings with color matched trim; Custom LED DRL system; LightWurkz Bi-Xenon projector lamps with custom-built shrouds; 6000K HID system with harness
Painted By LGE-CTS
Interior Modifications:

Katzkin Leather Interiors: Midnight Tuscany leather with Raven Black perforated Suedezkin inserts and charcoal contrasting stitching that lend a luxury look to the seats; Bone Suedezkin with Tuscany accents for door panel inserts
Headliner, pillars and package tray are covered in Bone and UltraFabrics low sheen material
BASF R-M Waterborn System paint was used to match exterior accents
Rockford Fosgate Punch Audio System, PBR300X4, PSD-10; P152 speakers
SRP Racing pedals: Billet aluminium, anodized
MACs Straps has outfitted the Fit with motorcycle tie downs with soft loop pack and direct-hook cam ratchets with 4-point anchor plates
Tera LED dome light bulbs

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2015 Honda Grom Modified by MAD Industries and ComposiMo Fabrication

(Photo not available at press time)

This highly modified Honda Grom was customized to match the MAD Industries Honda Fit and actually fits inside the Fit. The Grom is custom painted with BASF Deep Black and charcoal paint with matching custom gold wheels shod with Pirelli tires.

Modifications:

ComposiMo slip-in stretch kit and 6.5-inch rear lowering link
ComposiMo RaceBarZ handlebars with Woodcraft Racing clamp components
ComposiMo scooter-style front fork adapters and billet aluminum gas cap
ComposiMo throttle body clocking flange
ComposiMo TriPleX light brackets with Rigid Industries SR2 Hyper Driving Lights
Woodcraft Racing rear sets
Brocks Performance Alien-Head exhaust and Performance SF air filter
MNNTHBX frame side cover, LED tail light, and cam/tappet covers
Pirelli tires: 120/70-12 front & 140/60-12 rear
Rigid Industries A-Series LED accessory lights
Brembo front and rear brake calipers provided by Makoa Scooters
Front forks provided by Makoa Scooters
Paint By LGE-CTS / MAD Industries
Upholstery by MAD Industries

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Spoon Sports Super Taikyu 2015 Honda Fit


Spoon Sports USA is a pioneer in Honda tuning and racing. The Spoon Sports Super Taikyu 2015 Honda Fit was designed with endurance racing in mind, built with an emphasis on efficiency, reliability, and driver comfort. Using endurance racing as a test-bed, Spoon Sports develops and produces a wide range of tuning parts for Honda cars, many of which are featured and tested on this car.

Powertrain Modifications:

Spoon Sports Air Cleaner
Spoon Sports Intake Manifold
Spoon Sports Low Temp Thermostat
Spoon Sports Magnetic Drain Bolts
Spoon Sports Oil Filler and Radiator Caps, and Reservoir Covers
Spoon Sports Spark Plugs
Spoon Sports Super Taikyu Titanium Exhaust
Spoon Sports Venturi Throttle Body
Spoon Sports Yellow Valve Cover
Kinetic Custom Machine Lithium Battery Tray
Chassis/Suspension Modifications:

Spoon Sports Brake Lines and Brake Pads
Spoon Sports Prototype Full Monoblock Calipers
Spoon Sports Prototype Full Spec Dampers
Spoon Sports Subframe Rigid Collars
Spoon Sports USA One-Off Front Rotors
JDM Honda Genuine Rear Disc Brake Conversion and Rear Subframe
Exterior Modifications:

Spoon Sports Aero Mirrors
Spoon Sports Wheel Nuts
Spoon Sports Windshield Wipers
Spoon Sports USA One-Off Carbon Kevlar Sunroof Delete
JDM Honda Genuine Fit RS Front Bumper, Side Skirts, Rear Bumper, Roof Spoiler, Front Grill and Emblems
JDM Honda Genuine LED Projector Headlights, LED Front Marker Lights, and Tail Lights
ASM Dry Carbon License Plate, Short Antenna, and Titanium License Plate Bolts
Rays Volk Racing CE28 Club Racer Wheels F:15x7+10 R:15x7+28
Yokohama ADVAN 190/580-15 Slick Tires
PPG Paint by Signature Autobody
Interior Modifications:

Spoon Sports Blue Wide Rear View Mirror
Spoon Sports Carbon Bucket Seats
Spoon Sports Shift Knob
Spoon Sports Steering Boss
Spoon Sports Steering Wheel
Spoon Sports Super Taikyu Roll Cage
Spoon Sports USA One-Off Carbon Door Panels
Takata Racing Seat Belt Harnesses

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Kylie Tjin Special Edition 2015 Honda Fit

Voted the Fan Favorite in the 2015 Fit Performance Project



After having built two previous Honda Fit's for the SEMA show, designer Tjin Edition knew that for their third installment they had to pull out all the stops for their Unique Fabrication built Fit. Following their signature build style, but wanting to add some flavor and flare to the build, Tjin Edition's goal was to build the ultimate street Fit but with a wide and aggressive stance. To accomplish their goal, The Kylie Tjin Special Edition Fit has a custom metal wide body, one off paint job by L&R Autobody, lowered stance, and aggressive wheel and tire combo.

Exterior:

Custom metal fender flares by Josh Freeman
Custom Axalta paint job by L&R Auto Body
Coplus headlights
Coplus foglights
Coplus front lip
Athentic Japanese red H emblems
Webasto Sunroof
Wheels and tires:

18" iForged wheels (brushed and gunmetal finish with -35 offset)
18" Falken tires (215/35/18 FK453s)
Brakes and suspension:

Baer front big brakes
6 piston calipers (Hot Pink Kylie Tjin Edition)
14" rotors
Custom brackets and brake lines by Unique Fabrication
Airrex air management and air suspension
Performance:

Bisimoto pulse chamber
Interior:

Custom Katzkin interior
front seats
rear seats
door panels
center consol
SoCal Eilte 94Fifty basketball and sporting equipment
Scosche magic mount
Audio:

Sony Audio
subwoofer
amplifiers
mids and highs
Optima battery
Scosche audio wiring

 

Great thread, stickied

 

Super thread by our resident GK racer!!! Definitely a sticky!!!

 

that last one is great! gotta love SEMA.

Also does anyone has detailed pics of each car? i can't find anything other than google imagines that are very random.

 

"and Bisimoto's pulse chamber cat delete section that is supposed to have gained 20whp on an N/A fit"

Whats the details on this? this sounds pretty legit.

 

Winner winner chicken dinner

 

All the cars looked great in person

 

some more pics of the sema fits (turn the sound off)

Hondapro Jason gets inside and a few different angles

 

Here is the response to my inquiry on the lights from the Tjin Edition Fit.

"Thank you for your inquriy about our 2015 Honda FIT LED headlights.
The 2015 Honda FIT LED headlights will be available in 2-3 months as we still need some more time to check some specifications and carry out some tests.
Also we are in the process of looking for US distributor/retailer to sell our FIT series products in the US domestic market"

 

I like the spoon sport.

 

remarkable mods.. want to add some features to my ex.. Side Door Mirrors Rearview Stripe Cover TRIM, Door Lock Protector Cover buckle decoration, Mud Flaps Guard Mudguard Fenders Splash Flaps, PM Mirror Glass Rain Snow Shield Guard Sun Trim Visor etc..

 

I'm waiting for this...