HKS silent Hi-Power Exhaust installed
 

This was a test fit to find out if JDM HKS exhaust can be fitted on non L15B engine GK5 with CVT. The result was perfect fit, no modification required.
Car: Australian 2014 Honda Jazz VTI-L (GK5)
Engine: L15Z2
Transmission: CVT
Exhaust: HKS silent Hi-Power (Ordered from Japan)
Attachment 10864
Attachment 10865
Attachment 10866
Before and After
Attachment 10867
Attachment 10868
Attachment 10869
Sound Video

Will this fit the 2015?

Yes, this will fit 2015.

That has a nice low burble compared to stock. Doesn't sound tinny at all. Engine braking must sound a lot meaner now. Nice! Are you happy with the sound?

I really like the way that sounds.

Yes I'm happy with the sound so far, specially when doing engine braking.

Hmmm. Is there a US source, and can I install it without a lift?

Source was a problem for me here in Australia.
Hard to find one, or they have to special order from Japan with shocking price tag. So I order mine from Japan with perfectrun.jp
Or you can contact HKS USA?

To install it without lift. Jack the car up and place car stand, then you can start. Only require removing 2 bolts and 2 rubber mounts, then use them again on new exhaust.

I really like your car. Nice and clean and simple. As you probably already know, that color is not available in the States so it's always nice to see something different.

Those are my first choice in wheels, but I was impatient and settled on something else. I'll probably get them eventually for track use.

Car looks great!

It's got that Spoon rolled tip look

hi.. like your wheels alot.. mind asking the size and offset? btw, might ask pr for quotation for this hks exhaust too..

Wheels spec: Enkei RPF1 17x7 43
Tyre size: 205/45R17

Have more pics of the wheel set up? I was going to go Kosei K1, but after talking to them directly it'll be awhile if ever before they will make a 17x7.5 +45 again. They need 80 pieces ordered.

Here you go, but just be careful with copied wheels. Sometimes they end up(or worse) like the one in last picture.
Attachment 10738
Attachment 10739
Attachment 10740
Attachment 10741
Attachment 10742
Attachment 10743

What torque did you tighten the exhaust bolts? Also do you have any in car clips of the exhaust? I'm curious to hear what it sounds like in the cabin.

It was installed by a Japanese mechanic, I'm not sure what torque did he tighten the 2 bolts. He use hand tools only, the HKS instruction manual did show 19.6~24.5 Nm (2.0~2.5kgfm).
I didn't take any in car clips, it will increase noise level in cabin for sure. But if you worry about noise in the cabin, changing exhaust is no recommended.

Thanks for the torque settings will help.

As far as the sound level, I'm not worried about the increase in decibel as this isn't my first exhaust. I want to make sure it isn't "buzzy". I don't want it sounding like a bee buzzing around. All the clips I've seen on the hks exhaust have been outside the car.

I see, I do have this video link of a GK5 fitted with the same exhaust doing track driving. In car video, I hope you can see it.
20150614 ZIC Super Lap:CE-Racing GK5 ?? Time Attack.??????????????????

Thanks for the link but I can't get it to work, must use some crazy plug-in. I'll mess around with and see if I can get it to work.

Anyone know of any sellers in the states for this?